The Hotpoint H6 W845WB is a freestanding washing machine with an 8kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features Hotpoint's AquaCare™ technology for fabric care, multiple wash programs including a 15-minute fast wash, delay timer, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.
| Feature | Description |
|---|---|
| Capacity | 8kg (dry laundry weight) |
| Energy Rating | A+++ (most efficient) |
| Spin Speed | Up to 1400 RPM |
| AquaCare™ Technology | Reduces water usage while caring for fabrics |
| Wash Programs | 15+ programs including Cotton, Synthetics, Delicates, Quick Wash |
| Delay Timer | Up to 24 hours |
| Child Lock | Prevents accidental program changes |
| Anti-Flood Protection | AquaStop™ safety feature |
| Display | Digital with time remaining indicator |
| Door | Reversible for left/right opening |
Unpack and remove all transit bolts and packaging. Place on a solid, level floor.
WARNING! Do not remove transit bolts before moving to final location. Always use new hoses; do not reuse old ones.
After installation, run a maintenance wash before first use.
CAUTION! Ensure all packaging and bolts are removed. Failure to do so can cause severe vibration and damage.
Control Panel: Program dial, Start/Pause button, Option buttons (e.g., Extra Rinse, Pre-Wash, Delay), Spin Speed button, Temperature button, Display.
Basic Operation: Turn dial to select program. Use buttons to modify options (temp, spin, delay). Press Start/Pause. Display shows time remaining.
Options: Extra Rinse, Pre-Wash, Delay Start (1-24h), Reduced Creases, Speed Wash. Settings: Child Lock (press and hold relevant buttons), Reset (turn dial to Off position for 3 seconds).
Water Inlet: Connect blue-marked hose to cold tap; red to hot (if using dual supply). Use supplied hoses only. Drain: Ensure drain hose is not kinked and is secured at correct height (60-100cm from floor).
Tip: Use AquaStop™ hoses (if supplied) for added flood protection.
Select program based on fabric type and soil level.
WARNING! Do not open door during wash; hot water may cause scalding. Check pockets for objects.
AquaCare™: Uses less water while maintaining wash performance. Quick 15': Fast wash for lightly soiled items. Anti-Allergy: High-temperature wash to reduce allergens. Child Lock: Press and hold Delay and Extra Rinse for 3 seconds to lock controls.
Regular maintenance ensures longevity.
CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.
Complies with UK Electrical Equipment (Safety) Regulations 2016 and relevant EU directives. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Door not closed/power | Ensure door is shut firmly; check plug is switched on; check fuse. |
| No water entering | Taps off/hose kinked | Open taps fully; check hoses for kinks; clean inlet filter. |
| Water not draining | Drain blocked/filter | Check drain hose is not kinked or too low; clean pump filter. |
| Excessive vibration | Transit bolts/leveling | Ensure transit bolts removed; re-level the feet; redistribute load. |
| Error codes (e.g., F01, F05) | Fault detected | Consult manual error code list; try reset (turn off and on); call service. |
Reset: Turn program dial to Off for 5 seconds, then restart.
Service: 03448 113 113; www.hotpoint.co.uk