Hotpoint washing machine H 101B ANTI STAIN UK manual

The Hotpoint H 101B ANTI STAIN is a freestanding washing machine featuring Anti-Stain technology for superior stain removal, multiple wash programs, energy efficiency, and a user-friendly digital display. Designed for UK households, it operates on 220-240V AC, 50Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Anti-Stain Technology 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, Anti-Stain program button, detergent dispenser, drum light, adjustable feet, inlet hoses, drain hose.

Feature	Description
Anti-Stain Technology	Special program for removing tough stains like grass, wine, oil
Digital Display	Shows time remaining, program stage, and settings
Programme Dial	Selects from 14+ wash programs including Cotton, Synthetics, Delicates
Spin Speed Control	Adjustable up to 1400 rpm for reduced drying time
Delay Start	Delay wash start by up to 24 hours
Quick Wash	30-minute cycle for lightly soiled loads
Detergent Dispenser	Compartments for pre-wash, main wash, and fabric softener
Drum Light	Illuminates drum interior for easy loading/unloading
Child Lock	Prevents accidental program changes during operation
Energy Rating	A+++ for energy efficiency (typical UK model)

Installation

Unpack and inspect contents. Position on flat, stable floor near water/drain points.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Level machine using adjustable feet; ensure no rocking.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe, sink, or secure to wall (max height 100cm).
Plug into grounded electrical socket.

WARNING! Do not install in areas prone to freezing. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on machine; run initial empty wash.

Select language: Press and hold START/PAUSE for 3 seconds to set display language (default ENGLISH).
Run cleaning cycle: Use Drum Clean program (if available) or 90° Cotton cycle with detergent to remove residues.
Set default options: Use OPTIONS button to set preferred spin speed, temperature, etc.
Test wash: Run a quick cycle with old towels to ensure proper operation.

CAUTION! Ensure all packaging and protective films are removed. Check for water leaks after first connection.

Specifications

Model: Hotpoint H 101B ANTI STAIN
Capacity: 10 kg (cotton)
Energy Rating: A+++ (typical)
Spin Speed: Up to 1400 rpm
Programmes: 14+ including Anti-Stain, Cotton, Synthetics, Delicates, Wool, Quick Wash
Dimensions (HxWxD): Approx. 85cm x 60cm x 60cm
Water Pressure: 0.5 - 10 bar (cold fill)
Power Supply: 220-240V AC, 50Hz
Noise Level: Wash: 53 dB, Spin: 73 dB
Weight: Approx. 70 kg

Controls and Settings

Access settings via control panel. Main buttons: POWER, START/PAUSE, OPTIONS, ANTI-STAIN, CHILD LOCK.

Programme Dial: Turn to select wash program (Cotton, Synthetics, Delicates, Wool, etc.).

Options: Adjust temperature (cold-90°C), spin speed (0-1400 rpm), extra rinse, pre-wash, delay start. Display: Shows time remaining, program stage, selected options. Anti-Stain: Press dedicated button for stain removal cycle. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Cold water fill standard; some models accept hot water connection.

Turn off water supply before connecting hoses.
Connect blue hose to cold tap; red hose to hot tap (if applicable).
Secure drain hose in standpipe (min diameter 4cm) or over sink edge.
Ensure hose is not kinked and water flows freely.

Tip: Use hose clips provided. Check for leaks at connections before first use.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: fabric softener).
Select program: Turn dial to desired program (e.g., Cotton 40°C).
Adjust options: Press OPTIONS to modify temperature, spin speed, etc.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn dial to change program (if allowed).
End of cycle: Machine beeps; door unlocks after short delay.
Unload promptly to reduce creasing.

WARNING! Do not open door during high-temperature washes. Ensure pockets are empty of coins, keys, etc.

Anti-Stain Technology

Special program for tough stains: grass, wine, coffee, oil, mud.

Select Anti-Stain: Press dedicated button or turn dial to Anti-Stain symbol.
Pre-treat stains: Apply detergent directly to heavy stains for best results.
Load normally: Place pre-treated items in drum.
Start cycle: Program uses specific temperature and agitation sequence.

Note: For old stains, repeat cycle or use pre-wash option. Check garment care labels first.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly.

Clean dispenser: Remove drawer, rinse under warm water, dry fully.
Clean drum: Run Drum Clean program or 90°C Cotton cycle empty monthly.
Clean filter: Locate at front bottom; place towel, open slowly, remove debris.
Check drain pump: Clear if blocked (refer to manual for instructions).

CAUTION! Do not use abrasive cleaners. Keep door and detergent drawer open between washes to prevent mould.

Regulatory Information

UKCA/CE marked; complies with UK electrical safety standards. Energy label according to UK regulations. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0333 305 3515 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door fully closed; check plug socket; press START/PAUSE.
No water entering	Taps off/hose kinked	Open water taps; check hose for kinks; clean inlet filter.
Water not draining	Drain blocked/filter	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load; level feet.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 1 minute, retry.
Stains not removed	Program/temperature	Use Anti-Stain program; pre-treat stains; select higher temperature if fabric allows.

Reset: Unplug for 2 minutes, then restart.

Service: 0333 305 3515 (UK); www.hotpoint.co.uk