Hotpoint washing machine FMSL 603 EU manual

The Hotpoint FMSL 603 EU is a freestanding front-loading washing machine with a 6 kg capacity, energy efficiency class A+++, multiple wash programs, electronic controls, delay timer, child lock, and anti-flood protection. Designed for standard European household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet/outlet hoses, adjustable feet, and door lock.

FeatureDescription
Capacity6 kg maximum load
Energy ClassA+++ for high efficiency
Spin SpeedUp to 1200 rpm
Wash ProgramsCotton, Synthetics, Delicates, Quick Wash, etc.
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Anti-Flood ProtectionAutomatic water shut-off if leak detected
Door LockSafety lock during operation
DisplayLED indicators and time remaining
Adjustable FeetFor leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level floor near water and drain points.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Connect water inlet: Attach hose to cold water tap; ensure tight connection.
  3. Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
  4. Level the machine: Adjust feet using wrench; ensure no rocking.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first use, run an empty wash cycle to clean drum.

  1. Power on machine: Press POWER button; display lights up.
  2. Select program: Turn dial to "Cotton 90°C" without laundry.
  3. Add detergent: Pour 100 ml of detergent into compartment II.
  4. Start cycle: Press START/PAUSE; let complete.
  5. Set preferences: Use OPTIONS button for spin speed, temperature, etc.

CAUTION! Ensure water connections are secure before starting any wash cycle.

Specifications

Controls and Settings

Control Panel: POWER button, program dial, START/PAUSE, OPTIONS, DELAY, CHILD LOCK.

Program Dial: Select from Cotton (20°C-90°C), Synthetics, Delicates, Wool, Quick Wash (30 min), Eco 40-60, Rinse & Spin, Drain.

Options: Adjust spin speed (400-1200 rpm, Rinse Hold, No Spin), temperature (cold to 90°C), extra rinse, pre-wash. Delay Timer: Set 1-24 hours delay start. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Utilities

Water: Cold fill only; ensure tap is fully open. Drain: Hose must be between 60-100 cm high. Power: Use dedicated grounded socket.

  1. Turn off water and power before connecting.
  2. Attach inlet hose to tap; do not overtighten.
  3. Secure drain hose to standpipe or sink edge.
  4. Plug into socket; ensure voltage matches (220-240V).

Tip: Check for leaks after first connection by running a short rinse cycle.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Open door, load loosely; do not overload.
  2. Add detergent: Use compartments I (pre-wash), II (main wash), * (fabric softener).
  3. Select program: Turn dial to desired program (e.g., Cotton for towels).
  4. Adjust options: Press OPTIONS to change spin, temperature, etc.
  5. Start: Press START/PAUSE; door locks automatically.
  6. Pause/Stop: Press START/PAUSE to pause; turn dial to reset to stop.
  7. After cycle: Wait for door lock light off; remove laundry promptly.

WARNING! Do not open door during wash/spin; wait until lock light is off.

Safety Features

Child Lock: Prevents accidental program changes. Door Lock: Auto-locks during operation. Anti-Flood: Shuts off water if leak detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; never hose down machine.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lockCheck plug; ensure child lock is off; close door properly.
No water intakeTap/hose/kinkEnsure tap is on; check hose for kinks; clean inlet filter.
Water not drainingDrain hose blockedCheck hose for blockages; ensure height is 60-100 cm.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet for level.
Door won't openWater in drum/lock activeWait for lock light off; run drain/spin program.
Error codes (e.g., F01)Various faultsConsult manual error code list; power off/on; call service.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu

Hotpoint washing machine FMSL 603 EU manual © - All Rights Reserved 2025