Hotpoint washing machine FML 942 G UK manual

The Hotpoint FML 942 G is a freestanding washing machine with a 9kg load capacity, featuring multiple wash programmes, energy efficiency class A, spin speed up to 1400 rpm, delay timer, child lock, and easy-to-use controls. Designed for UK household use with a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

1. Position the machine: Ensure at least 1cm space from walls and cabinets.
2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable) using supplied connectors.
3. Connect drain hose: Place into standpipe or sink (minimum height 60cm, maximum 100cm from floor).
4. Level the machine: Adjust the feet using a spanner; check with spirit level.
5. Plug into a grounded 3-pin socket (220-240V, 13A).

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an empty cotton cycle at 90°C to clean the drum.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
2. Connect power and turn on: The display will light up.
3. Set language: Press and hold PROGRAMME and OPTION buttons for 3 seconds to select English.
4. Run initial clean cycle: Select Cotton 90°C programme and start without laundry.
5. Familiarise with controls: Review programme chart on control panel.

CAUTION! Ensure all packaging and transit bolts are removed before first use to prevent damage.

Specifications

• Model: Hotpoint FML 942 G
• Capacity: 9kg (cotton)
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Spin Speed: Up to 1400 rpm
• Energy Rating: A
• Water Pressure: 0.5 - 10 bar
• Programmes: 15 programmes including Eco, Quick 30', Wool, Silk
• Power Supply: 220-240V, 50Hz
• Maximum Power: 2100W
• Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: POWER button, PROGRAMME selector knob, OPTION buttons (e.g., Extra Rinse, Pre-wash), START/PAUSE button, DELAY TIMER button.

Display: Shows programme duration, time remaining, selected options, and error codes.

Programme Selection: Turn knob to desired programme (e.g., Cotton 40°C). Options: Press relevant button to activate (e.g., Extra Rinse lights up). Delay Timer: Press DELAY button and use +/- to set start time (up to 24h). Child Lock: Press and hold START/PAUSE and OPTION buttons for 3 seconds to activate/deactivate. Temperature/Spin Adjustment: Use +/- buttons after selecting programme to modify default settings.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water supply; red hose to hot (if used). Drain: Secure drain hose to standpipe or sink.

1. Ensure water taps are off before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Ensure drain hose is not kinked and is secured to prevent slipping.
4. After connections, open water taps fully and check for leaks.

Tip: Install a drain hose support if using a sink to prevent backflow.

Using Wash Programmes

Supports various fabrics and soil levels.

1. Load laundry: Open door, load items loosely without overfilling.
2. Add detergent: Pour into correct dispenser drawer compartment (I: pre-wash, II: main wash, *: fabric softener).
3. Select programme: Turn knob (e.g., Synthetics 40°C).
4. Set options: Press desired option buttons (e.g., Extra Rinse).
5. Adjust temperature/spin: Use +/- if needed.
6. Start: Press START/PAUSE; door locks and cycle begins.
7. Pause/Add: Press START/PAUSE to pause; door unlocks after a few seconds to add forgotten items.
8. End of cycle: Signal sounds; door unlocks. Remove laundry promptly.

WARNING! Do not open door during high-temperature washes; steam may cause burns. Check pockets for objects.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash and remains locked until safe. Overflow Protection: Automatically stops water intake if detected. Imbalance Detection: Reduces spin speed or stops if load is uneven.

Care & Cleaning

Unplug before maintenance. Monthly: Clean detergent drawer and rubber door seal. Every 3 months: Run cleaning cycle (90°C cotton) with washing machine cleaner. Check and clean pump filter if draining issues occur.

CAUTION! Do not use abrasive cleaners or solvents. Keep the area around the machine dry.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016 and relevant EU directives. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk