Hotpoint washing machine FML 742P UK manual

The Hotpoint FML 742P is a freestanding 7kg capacity washing machine with 1200 RPM spin speed, featuring multiple wash programmes, energy efficiency rating, delay start, child lock, and various safety features. Designed for UK household use with 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door with safety lock, water inlet valves, drain pump filter, adjustable feet.

Feature	Description
Capacity	7kg laundry load
Spin Speed	Up to 1200 RPM
Energy Rating	A+++ (most efficient)
Programmes	Cotton, Synthetic, Delicate, Quick Wash, etc.
Delay Start	Up to 24 hours
Child Lock	Prevents accidental programme changes
Door Lock	Automatic safety lock during cycle
Display	Digital with time remaining indicator
Detergent Drawer	Compartments for pre-wash, main wash, softener
Adjustable Feet	For levelling on uneven floors

Installation

Unpack and remove transit bolts. Place on solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4” thread); ensure washers are fitted.
Connect drain hose: Place into standpipe or sink; secure with hook if provided.
Level the machine: Adjust front feet to ensure machine is stable and does not vibrate.
Plug into grounded power socket.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a cotton cycle at 90°C without laundry to clean the drum.

Power on machine: Press POWER button.
Select language: If applicable, set display language via settings.
Set clock: Use programme knob and buttons to set current time.
Load detergent: Add powder/liquid to appropriate drawer compartments.
Run initial clean cycle: Select Cotton 90°C programme and start.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: FML 742P
Capacity: 7kg
Spin Speed: 1200 RPM (adjustable)
Dimensions (HxWxD): 85cm x 60cm x 60cm (approx)
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V, 50Hz
Energy Class: A+++
Programmes: 15+ including Cotton, Eco, Synthetic, Delicate, Wool, Quick Wash
Noise Level: Wash: 53 dB, Spin: 75 dB
Weight: 70kg (approx)

Controls and Settings

Control Panel: POWER button, programme knob, temperature button, spin speed button, delay start button, start/pause button, display.

Programme Selection: Turn knob to desired programme (Cotton, Synthetic, Delicate, etc.).

Temperature: Press TEMP button to cycle through options (Cold, 30°C, 40°C, 60°C, 90°C).

Spin Speed: Press SPIN button to select speed (RPM) or Rinse Hold.

Delay Start: Press DELAY to set start time (1-24 hours).

Child Lock: Press and hold CHILD LOCK button for 3 seconds to activate/deactivate.

Display: Shows programme duration, time remaining, temperature, spin speed, and error codes.

Connecting Water & Drain

Cold water fill only. Ensure proper drainage to avoid flooding.

Water inlet: Connect blue-marked hose to cold water tap. Do not use with hot water.
Drain hose: Insert into standpipe (minimum height 60cm, max 100cm) or secure over sink edge.
Check connections: Run quick test cycle to verify no leaks.

Tip: Use hose clips provided and do not kink hoses. Ensure drain hose is not submerged.

Using Wash Programmes

Select programme based on fabric type and soil level.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
Select programme: Turn knob (e.g., Cotton for towels/bedding).
Adjust settings: Set temperature, spin speed, delay if needed.
Start: Press START/PAUSE; door locks automatically.
End of cycle: Audible signal; door unlocks after a few minutes.
Unload: Remove laundry promptly to avoid creasing.

WARNING! Do not open door during cycle; wait for unlock symbol. Check pockets for objects.

Special Features

Delay Start: Programme starts at set time. Child Lock: Locks controls. Rinse Hold: Holds laundry in water after final rinse (for easy ironing). Extra Rinse: Adds rinse cycle for sensitive skin. Half Load: Reduces water for smaller loads.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent drawer: Remove monthly; wash under warm water.
Clean door seal: Wipe rubber gasket to remove lint/debris.
Clean drain pump filter: Turn off and unplug; open filter cover at front bottom; drain residual water; remove obstructions.
Run maintenance wash: Monthly, use hot cotton programme with drum cleaner or 1 cup of white vinegar.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug socket; ensure door closed properly; press START.
No water intake	Taps/hose/filter	Ensure taps on; check hose for kinks; clean inlet filter.
Water not draining	Drain hose/pump filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/levelling/load	Ensure transit bolts removed; adjust feet; redistribute laundry.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 minutes, restart.
Leaking water	Hoses/detergent drawer	Tighten connections; ensure detergent drawer closed; check door seal.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk