Hotpoint washing machine FML 602 EU manual

The Hotpoint FML 602 EU is a freestanding washing machine with a 6 kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 rpm, delay timer, child lock, and various fabric care options. Designed for standard European household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	6 kg maximum load
Spin Speed	Up to 1200 rpm
Energy Class	A (energy efficient)
Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	LED showing time, cycle, and options
Door Lock	Automatic during operation
Adjustable Feet	For leveling on uneven floors
Detergent Dispenser	Compartments for pre-wash, main wash, softener

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using wrench; ensure it does not rock.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash cycle.

Check connections: Ensure water taps are on and hoses secure.
Select a program: Choose Cotton 90°C without laundry.
Add detergent: Place small amount in dispenser.
Start cycle: Press Start/Pause; let complete to clean drum.
Set preferences: Adjust default options like spin speed or temperature if needed.

CAUTION! Never use machine without removing transit bolts; this can cause severe damage.

Specifications

Model: FML 602 EU
Capacity: 6 kg
Dimensions (HxWxD): 85 x 60 x 55 cm
Spin Speed: 1200 rpm (adjustable)
Energy Rating: A
Water Pressure: 0.5 - 8 bar
Programs: 12 including Cotton, Synthetics, Delicates, Quick Wash, Wool, Rinse & Spin
Power Supply: 220-240V, 50Hz
Noise Level: Wash: 59 dB, Spin: 77 dB
Weight: 65 kg

Controls and Settings

Control Panel: Power button, program selector knob, temperature button, spin speed button, delay timer button, start/pause button, option buttons (e.g., extra rinse, pre-wash).

Display: Shows selected program, time remaining, temperature, spin speed, and active options.

Programs: Cotton (40°C-90°C), Synthetics (40°C-60°C), Delicates (30°C), Quick Wash (30°C), Wool, Silk, Rinse & Spin, Drain. Options: Pre-wash, extra rinse, half load, child lock. Settings: Adjust temperature (cold to 90°C), spin speed (0-1200 rpm), delay timer (1-24 hours).

Connecting Water Supply

Inlet: Hot and cold water connections (if model supports). Drain: Hose to standpipe or sink.

Turn off machine and water taps before connecting.
Attach inlet hoses: Blue for cold, red for hot; tighten by hand, then quarter turn with pliers.
Position drain hose: Height between 60-100 cm from floor; secure with hook if provided.
Check for leaks: Turn on taps and inspect connections.

Tip: Use only provided hoses; do not reuse old ones. Ensure drain hose is not kinked.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Use dispenser compartments as per instructions.
Select program: Turn knob to desired program (e.g., Cotton for linens).
Adjust settings: Press temperature or spin buttons to modify.
Add options: Press extra rinse, pre-wash if needed.
Start: Press Start/Pause; door locks automatically.
Pause/change: Press Start/Pause to stop; wait for door unlock signal.
End of cycle: Signal sounds; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash or spin; wait for unlock indicator. Do not wash items soaked in solvents.

Special Functions

Delay Timer: Set wash to start later (1-24 hours). Child Lock: Press and hold specific buttons to lock controls. Half Load: Reduces water for smaller loads. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run drum clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners or solvents. Clean filter periodically to prevent blockages.

Regulatory Information

CE marked; complies with EU safety and EMC directives. Energy label according to EU regulation. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug and power; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level; redistribute load.
Leaking water	Hose connections	Tighten inlet/drain hoses; check detergent dispenser for overfill.
Door won't open	Water in drum/safety lock	Wait for unlock signal; run drain or spin program to remove water.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu