Hotpoint washing machine FMG 1023B EU manual

The Hotpoint FMG 1023B EU is a freestanding front-loading washing machine with a 10kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1200 rpm, delay timer, child lock, and anti-flood protection. Designed for European household use with 230V/50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	10kg maximum load
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1200 rpm (adjustable)
Programs	15 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents program changes during operation
Anti-Flood Protection	AquaStop system for leak prevention
Display	LED digital display with time remaining
Door Lock	Automatic safety lock during wash cycle
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink (minimum height 60cm).
Level the machine: Adjust front feet using spanner; check with spirit level.
Plug into grounded power outlet (230V/50Hz).

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Run empty wash: Select Cotton program at 90°C without laundry.
Set language: Press and hold PROGRAM + SPIN for 3 seconds to select language.
Test functions: Check water inlet, drain, and spin operation.
Load detergent: Fill dispenser compartments as per instructions.

CAUTION! Ensure water connections are tight to prevent leaks. Check drain hose is not kinked.

Specifications

Model: FMG 1023B EU
Capacity: 10kg (cotton)
Dimensions (HxWxD): 85 x 60 x 60 cm
Energy Rating: A+++
Annual Consumption: 190 kWh
Water Consumption: 10,200 liters/year
Spin Speed: 1200 rpm (max)
Noise Level: 53 dB (wash), 73 dB (spin)
Programs: 15 including Eco 40-60, Wool, Sport, Mix
Power Supply: 230V~50Hz
Weight: 72 kg

Controls and Settings

Control Panel: POWER, PROGRAM selector, TEMPERATURE, SPIN SPEED, OPTION buttons, START/PAUSE, DELAY TIMER.

Program Selection: Turn knob to select: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Quick Wash (15/30 min), Wool, Silk, Sport, Mix, Eco 40-60, Drum Clean, Rinse+Spin, Spin Only, Drain.

Options: Extra Rinse, Pre-Wash, Anti-Crease, Speed Wash, Night Mode (reduced spin).

Settings: Child Lock (press and hold DELAY + OPTION for 3 sec), End of Cycle Beep (press and hold TEMPERATURE + SPIN), Reset (unplug for 1 minute).

Connecting Water & Drain

Water Inlet: Connect hoses to taps with washers. Drain: Secure hose to standpipe or sink.

Turn off water taps before connecting.
Use only supplied hoses; replace if damaged.
Drain hose must be between 60-100 cm height.
Ensure no kinks in hoses.

Tip: Check inlet filters monthly; clean if clogged.

Using Wash Programs

Follow fabric care labels. Sort laundry by color and fabric type.

Load laundry: Do not exceed 10kg; distribute evenly.
Add detergent: Use compartment I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob to desired program.
Start: Press START/PAUSE; door locks automatically.
Pause/Add: Press START/PAUSE to stop; wait 2 min to add items.
End of cycle: Machine beeps; door unlocks after 2 minutes.

WARNING! Do not open door during wash or spin. Wait for drum to stop completely.

Special Functions

Delay Timer: Set 1-24 hours delay. Child Lock: Locks controls during operation. Drum Clean: Run monthly with detergent at 90°C. Anti-Crease: Reduces wrinkles by tumbling periodically after cycle.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and drum. Run Drum Clean program. Check drain pump filter if draining slow.

CAUTION! Unplug before cleaning. Wipe with damp cloth only; do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives 2014/35/EU (LVD), 2014/30/EU (EMC), 2009/125/EC (ErP). Energy label according to EU regulation 2019/2014. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure door closed properly; disable child lock.
No water intake	Taps/filters/hoses	Open taps; clean inlet filters; check hose kinks.
Water doesn't drain	Drain pump/filter	Clean pump filter; check drain hose height/blockage.
Excessive vibration	Transit bolts/leveling/load	Ensure transit bolts removed; relevel machine; redistribute load.
Error codes (E01-E10)	Various faults	Consult manual; common: E01 (door issue), E02 (drain problem), E07 (motor fault).

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service: www.hotpoint.eu/service