Hotpoint washing machine FMF 823 EU manual

The Hotpoint FMF 823 EU is a freestanding front-loading washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 RPM, delay timer, child lock, and various fabric care options. Designed for standard European household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and power cord.

Installation

Unpack and remove transit bolts. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn to level machine; use spirit level to check.
3. Connect water supply: Attach hoses to hot/cold taps (if applicable); use new seals.
4. Connect drain hose: Place in standpipe or sink (max height 100cm).
5. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

After installation, run an empty wash cycle to clean drum.

1. Power on: Press POWER button; display lights up.
2. Select program: Turn program selector to "Cotton 90°C".
3. Add detergent: Pour 100ml of detergent into compartment II.
4. Start cycle: Press START/PAUSE; machine will run for approx. 2 hours.
5. After cycle: Wipe drum interior with soft cloth.

CAUTION! Ensure water connections are tight to prevent leaks. Check drain hose is not kinked.

Specifications

• Model: Hotpoint FMF 823 EU
• Capacity: 7kg
• Energy Efficiency Class: A
• Spin Speed: 1200 RPM (max)
• Programs: 12 programs including Cotton, Synthetics, Delicates, Wool, Quick Wash (30°C), Rinse & Spin, Drain
• Water Pressure: 0.5 - 10 bar
• Power Supply: 220-240V, 50Hz
• Power Consumption: 2000W (max heating)
• Noise Level: Wash: 56 dB, Spin: 76 dB
• Dimensions (HxWxD): 85 x 60 x 55 cm
• Weight: 65 kg

Controls and Settings

Control Panel: POWER button, program selector knob, temperature button, spin speed button, delay timer button, START/PAUSE button, option buttons (e.g., extra rinse, prewash).

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, Wool, etc.). Temperature: Press TEMP to cycle through 30°C, 40°C, 60°C, 90°C, cold. Spin Speed: Press SPIN to select 400, 600, 800, 1000, 1200 RPM or no spin. Delay Timer: Press DELAY to set start time (1-24 hours). Options: Extra rinse, prewash, easy iron (reduces wrinkles). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to hot/cold taps (red for hot, blue for cold). Drain: Place hose in standpipe (max height 100cm) or over sink edge.

1. Ensure taps are off before connecting hoses.
2. Use only supplied hoses; replace if damaged.
3. Secure drain hose to prevent slipping.
4. After connections, open taps fully and check for leaks.

Tip: Use hose clips if provided. Do not extend drain hose beyond 1.5m.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Open door, load items loosely (do not overload).
2. Add detergent: Pour into compartment I (prewash), II (main wash), III (fabric softener).
3. Select program: Turn knob (e.g., Cotton for towels/bed linen).
4. Adjust settings: Set temperature, spin speed, options as needed.
5. Start: Press START/PAUSE; door locks and cycle begins.
6. After cycle: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash items soaked in solvents. Remove coins, keys from pockets.

Special Functions

Delay Timer: Set wash to start later (press DELAY, use +/- to set hours). Child Lock: Locks controls (press and hold CHILD LOCK 3 sec). Extra Rinse: Adds rinse cycle for sensitive skin. Prewash: For heavily soiled loads. Easy Iron: Reduces spin speed to minimize wrinkles.

Care & Cleaning

Regular maintenance ensures performance and longevity.

1. Clean detergent drawer: Pull out, rinse under warm water.
2. Clean door seal: Wipe with damp cloth to remove lint/residue.
3. Clean filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter cap; clean under running water.
4. Run drum clean: Monthly, run empty "Cotton 90°C" cycle with drum cleaner.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE marked; complies with EU directives for safety (LVD, EMC) and eco-design. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For EU product registration, visit www.hotpoint.eu. Waste disposal: Dispose of machine according to local WEEE regulations. For support, contact Hotpoint customer service at 08448 224 224 (UK) or visit www.hotpointservice.co.uk.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 08448 224 224; www.hotpointservice.co.uk