Hotpoint washing machine FMD 923XR EU.C manual

The Hotpoint FMD 923XR EU.C is a freestanding washing machine with a 9kg capacity, 1200 RPM spin speed, and energy efficiency class A. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1200 RPM
Energy Class	A (energy efficient)
Display	Digital LED with time remaining
Programs	15 wash programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Door Lock	Automatic during cycle
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Level the machine: Adjust front feet to ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on machine: Press POWER button.
Select maintenance cycle: Choose "Drum Clean" or "Cotton 90°C" without laundry.
Add detergent: Place 100 ml of liquid detergent in drum (not dispenser).
Start cycle: Press START/PAUSE. This removes residues from manufacturing.
Set language: If applicable, use settings menu to select language.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: FMD 923XR EU.C
Capacity: 9 kg
Spin Speed: 1200 RPM
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230V ~ 50Hz
Power Consumption: 2100 W (heating)
Programs: 15 including Eco 40-60, Wool, Sport, Mix
Noise Level: 53 dB (washing), 73 dB (spinning)
Weight: 70 kg

Controls and Settings

Control Panel: POWER button, program selector knob, digital display, temperature button, spin speed button, option buttons (Delay Start, Extra Rinse, etc.), START/PAUSE.

Display Icons: Child Lock, Delay Start, Spin Speed, Temperature, Time Remaining.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicates, Quick 30', etc.). Temperature: Press TEMP to cycle through 30°C, 40°C, 60°C, 90°C, Cold. Spin Speed: Press SPIN to select 400, 600, 800, 1000, 1200 RPM or Rinse Hold. Options: Delay Start (1-24h), Extra Rinse, Pre-Wash, Intensive. Child Lock: Press and hold CHILD LOCK for 3 seconds (default off).

Connecting Water & Drain

Water Inlet: Cold water only (unless model has hot fill). Drain: To standpipe or sink.

Turn off water tap before connecting hose.
Connect inlet hose to machine (red collar) and tap. Do not overtighten.
Place drain hose in standpipe (max 100 cm height) or over sink edge.
Secure drain hose to prevent slipping.

Tip: Check for leaks by turning on water tap briefly before starting machine.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load items loosely (do not overload).
Add detergent: Pour into dispenser compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetic for synthetics).
Adjust settings: Set temperature, spin speed, and options if needed.
Start: Press START/PAUSE. Door locks automatically.
After cycle: "End" appears; door unlocks after a few minutes. Remove laundry promptly.

WARNING! Do not open door during cycle; wait for unlock signal. Remove objects from pockets.

Special Functions

Delay Start: Set 1-24 hours; machine starts automatically. Child Lock: Prevents changes during cycle. Extra Rinse: Adds rinse for sensitive skin. Intensive: For heavily soiled items. Rinse Hold: Stops with water in drum for easy handwashing.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and drum.

Unplug machine before cleaning.
Wipe exterior with damp cloth; do not use abrasive cleaners.
Pull out detergent dispenser to clean under running water.
Wipe door seal to remove lint and residue.
Run "Drum Clean" cycle monthly without laundry.

CAUTION! Never use harsh chemicals; keep control panel dry.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power outlet; press START.
No water intake	Tap off/hose kinked	Open water tap; straighten inlet hose; check filter.
Water doesn't drain	Drain hose blocked	Check for kinks; clean pump filter; ensure height < 100 cm.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu