Hotpoint washing machine FDL 9640P UK manual

The Hotpoint FDL 9640P is a freestanding washing machine with a 9kg load capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9kg drum for large loads
Spin Speed	Up to 1400 RPM for efficient drying
Energy Rating	A+++ for low energy consumption
Digital Display	Shows time, cycle, and settings
Delay Start	Program start up to 24 hours later
Child Lock	Prevents accidental program changes
Anti-Flood Protection	AquaStop technology for leak prevention
Detergent Drawer	Compartments for pre-wash, main wash, softener
Quick Wash	30-minute cycle for lightly soiled items
Adjustable Feet	For stability on uneven floors

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water inlet: Attach hoses to hot and cold taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or sink; secure with hook.
Plug into grounded socket.

WARNING! Do not use extension cords. Ensure water taps are fully open and hoses are not kinked.

First-Time Setup

Plug in and run a maintenance wash.

Initial power on: Press POWER button; display lights up.
Run empty wash: Select Cotton 90°C program without laundry to clean drum.
Set clock: Press and hold CLOCK button, use +/- to set time.
Load detergent: Fill drawer compartments as per detergent instructions.
Select program: Turn program selector to desired cycle.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: FDL 9640P UK
Capacity: 9kg
Spin Speed: 1400 RPM
Energy Rating: A+++
Water Pressure: 0.5-10 bar
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz
Noise Level: 53 dB (washing), 75 dB (spinning)
Weight: 70kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (Delay, Extra Rinse, etc.), CHILD LOCK.

Display: Shows time remaining, cycle stage, and selected options.

Programs: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (30°C), Wool (40°C), Quick Wash (30°C), Spin Only, Rinse & Spin. Options: Delay Start (1-24h), Extra Rinse, Reduced Creases, Pre-Wash. Settings: Clock adjustment, volume control, end-of-cycle signal.

Connecting Water & Drain

Water Inlet: Hot and cold hoses. Drain: Hose to standpipe or sink.

Turn off taps and unplug machine before connections.
Connect hoses: Screw inlet hoses to taps; ensure washers are fitted.
Drain hose: Insert into standpipe (max height 100cm) or secure over sink edge.
Check for leaks: Turn on taps and inspect connections.

Tip: Use only provided hoses; do not overtighten.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pour into correct drawer compartment.
Select program: Turn selector (e.g., Cotton for towels/bedding).
Set options: Press OPTIONS for Extra Rinse, Delay, etc.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to stop; wait for door lock to release.
End of cycle: Signal sounds; remove laundry promptly.

WARNING! Do not open door during wash; wait for lock light to go off.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Quick Wash: 30-minute cycle for small, lightly soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Run maintenance wash every 40 cycles: use hot cotton program with drum cleaner or vinegar.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste electrical products must not be disposed of with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 225 225.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in; ensure door is closed properly.
No water intake	Taps/hoses	Ensure taps are on; check hoses for kinks; clean inlet filters.
Water not draining	Drain hose/pump	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load evenly.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 225 225; www.hotpoint.co.uk