Hotpoint washing machine FDL 9640K UK manual

The Hotpoint FDL 9640K is a freestanding 9kg capacity washing machine with an A+++ energy rating, featuring a 1400 rpm spin speed, multiple wash programs including Eco 40-60, Quick Wash, and Delicates, a delay timer up to 24 hours, and child lock safety feature. It includes a digital display, rotary program selector, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9kg drum capacity, Digital display, Rotary program selector, Detergent drawer, Door with safety lock, Adjustable feet, Water inlet hoses, Drain hose.

Installation

Unpack and remove all transit bolts. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn feet to level machine; use spirit level to check.
3. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if required (red marker).
4. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on machine: Plug in and press POWER button.
2. Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
3. Set preferences: Use OPTIONS button to adjust spin speed, temperature, or delay start.
4. Load detergent: Add to correct drawer compartment (I for pre-wash, II for main wash, ❉ for softener).
5. Close door and press START/PAUSE.

CAUTION! Ensure packaging materials and transit bolts are fully removed. Check for water leaks after first connection.

Specifications

• Model: FDL 9640K UK
• Capacity: 9 kg
• Energy Class: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 9,500 litres per year
• Spin Efficiency Class: B
• Noise Level (Wash/Spin): 53/76 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Voltage/Frequency: 220-240V ~ 50Hz
• Max Power: 2100 W
• Programs: 15 including Eco 40-60, Cotton, Synthetics, Delicates, Wool, Hand Wash, Sport, Jeans, Quick Wash, Drum Clean

Controls and Settings

Control Panel: POWER button, Rotary program selector, Digital display, START/PAUSE button, OPTIONS buttons (Temp, Spin, Delay).

Display Icons: Door locked, Child lock active, Delay start time, Spin speed, Temperature, Cycle time remaining.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics). Options: Adjust temperature (20°C-90°C), spin speed (0-1400 rpm), delay start (1-24 hrs). Child Lock: Press and hold CHILD LOCK button for 3 seconds to enable/disable. Pause/Modify: Press START/PAUSE to stop; change options before restarting.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100 cm) or sink.

1. Ensure taps are off before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Secure drain hose to prevent slipping.
4. Check for leaks by turning taps on slowly.

Tip: Install a drip tray if machine is on wooden floor or above living space.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not exceed 9 kg; distribute evenly.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), ❉ (softener).
3. Select program: Turn knob (e.g., Cotton for cottons, Synthetics for synthetics).
4. Adjust options: Press TEMP/SPIN/DELAY to modify as needed.
5. Start: Close door, press START/PAUSE.
6. Pause/Add: Press START/PAUSE to stop; you may add forgotten items within first 2 minutes.
7. End of cycle: Door unlocks; remove laundry promptly to avoid wrinkles.

WARNING! Do not wash items soaked in flammable fluids. Close zippers and fasten hooks before washing.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash. Anti-Flood: AquaStop detects leaks and stops water. Imbalance Control: Reduces spin speed if load is uneven. Overheating Protection: Thermal cut-out prevents motor overheating.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

1. Detergent drawer: Remove by pressing release lever; rinse under tap.
2. Door seal: Wipe with damp cloth to remove lint and residue.
3. Filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter cap; clean under running water.
4. Run Drum Clean program monthly or use washing machine cleaner.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on door or drum.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 0333 305 2263 (UK).

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 305 2263 (UK); www.hotpoint.co.uk