Hotpoint washing machine FDL 8640P UK manual

The Hotpoint FDL 8640P is a freestanding washing machine with an 8kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programmes. It features electronic controls, a digital display, delay start, child lock, and various fabric-specific cycles. Designed for UK household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent drawer, drum, door seal, filter, inlet hoses, drain hose, adjustable feet.

Feature	Description
Capacity	8kg (dry laundry weight)
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Programmes	15+ including Cotton, Synthetics, Delicates, Quick Wash
Display	Digital LED with time remaining
Delay Start	Up to 24 hours
Child Lock	Prevents accidental programme changes
Door Lock	Automatic during cycle
Detergent Drawer	Compartments for pre-wash, main wash, softener
Adjustable Feet	For levelling the machine

Installation

Unpack and remove transit bolts. Place on solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine.
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust feet using spanner; ensure it does not rock.
Plug into grounded 3-pin socket.

WARNING! Do not install in areas below 0°C. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" programme without laundry.
Set preferences: Use SETTINGS button to adjust buzzer volume, end-of-cycle signal.
Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Ensure transit bolts are removed before use to prevent damage.

Specifications

Model: FDL 8640P UK
Capacity: 8kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 50 litres per cycle (cotton 60°C)
Noise Level: Washing: 53 dB; Spinning: 73 dB
Programmes: Cotton, Eco Cotton, Synthetics, Delicates, Wool, Quick Wash (14'), Sport, Jeans, Anti-Allergy, Drum Clean.
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz, 10A
Weight: 70kg

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAMME SELECTOR knob, OPTIONS buttons (Delay, Extra Rinse, etc.), CHILD LOCK.

Display Icons: Time remaining, door locked, child lock, delay start, temperature, spin speed.

Programme Selection: Turn knob to desired programme (e.g., Cotton 40°C). Options: Press corresponding button to add pre-wash, extra rinse, reduced creases. Temperature: Auto-selected per programme; adjust with TEMP button. Spin Speed: Auto-selected; adjust with SPIN button (including Rinse Hold). Delay Start: Set delay up to 24 hours. Child Lock: Press and hold CHILD LOCK for 3 seconds.

Connecting Water & Drain

Water Inlet: Connect blue-marked hose to cold water tap. Drain: Place hose in standpipe (not submerged) or over sink edge.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not overtighten.
Secure drain hose with provided U-bend holder.
Check for leaks after first connection.

Tip: Leave a small gap between drain hose end and water in standpipe to prevent siphoning.

Using Wash Programmes

Select programme based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Pour into correct drawer compartment (I: pre-wash, II: main wash, *: softener).
Select programme: Turn knob (e.g., Synthetics 40°C).
Set options: Press Extra Rinse, Reduced Creases, etc.
Start: Press START/PAUSE; door locks automatically.
Pause/Stop: Press START/PAUSE to pause; press again to resume. To cancel, turn knob to OFF.
After cycle: Door unlocks; remove laundry promptly.

WARNING! Do not open door during cycle; wait for unlock symbol. Check pockets for objects.

Safety Features

Child Lock: Disables controls (hold button 3 sec). Door Lock: Automatically locks during wash. Overflow Protection: Stops water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Regularly clean detergent drawer, door seal, and filter.

Detergent drawer: Pull out, rinse under tap.
Door seal: Wipe with damp cloth; remove debris.
Filter: Turn drain pump cover anti-clockwise, remove filter, clean under running water.
Run "Drum Clean" monthly with proprietary cleaner.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 225 225.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug, socket, fuse; ensure door closed properly.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses for kinks; clean inlet filter.
Water leaks	Hoses connections	Tighten hose connections; check door seal for debris.
Excessive vibration	Transit bolts/levelling	Ensure transit bolts removed; re-level machine.
Drum not spinning	Imbalance/overload	Redistribute load; select lower spin speed.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 mins, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 225 225; www.hotpoint.co.uk