Hotpoint Washing Machine FDL 754 P UK Manual

The Hotpoint FDL 754 P is a freestanding washing machine with a 7kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programmes, a delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, LED display, programme selector knob, detergent dispenser, filter access, AquaStop system.

FeatureDescription
Capacity7kg (dry laundry weight)
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
Programmes14 programmes including Cotton, Synthetics, Delicates, Quick Wash
Delay TimerUp to 24 hours
Child LockPrevents accidental programme changes
AquaStopLeak protection system
DisplayLED with time remaining and cycle indicators
DoorReversible for left/right opening
Dimensions (HxWxD)850 x 600 x 540 mm

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Position machine: Ensure at least 1cm clearance from walls; do not install behind lockable door.
  3. Level the machine: Adjust front feet; use spirit level.
  4. Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
  5. Connect drain hose: Place in standpipe or sink (max height 100cm).
  6. Plug into earthed power socket.

WARNING! Do not use extension cords. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Connect power and turn on machine.
  2. Run empty cotton cycle at 90°C with detergent to clean drum.
  3. Set water hardness: Consult manual for dial setting based on local water.
  4. Familiarise with controls: Turn selector knob; press buttons for options.
  5. Load laundry: Do not exceed 7kg; distribute evenly.

CAUTION! Ensure machine is level to prevent excessive vibration.

Specifications

Controls and Settings

Control Panel: Programme selector knob, START/PAUSE button, OPTION buttons, LED display.

Programme Knob: Turn to select: Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash (30 mins), Wool, Hand Wash, Duvet, Sport, Eco 40-60, Drum Clean, Spin Only, Rinse & Spin, Drain.

Option Buttons: Delay Start (1-24h), Extra Rinse, Pre-Wash, Speed (reduce spin speed), Start/Pause.

Display: Shows time remaining, cycle stage, and selected options.

Child Lock: Press and hold Delay and Speed buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold fill only. Drain: Via hose to standpipe or sink.

  1. Ensure water tap is off before connecting hose.
  2. Connect inlet hose to machine (right rear) and to cold tap.
  3. Secure drain hose in standpipe (max 100cm height) or over sink edge.
  4. Check for leaks: Turn on tap; inspect connections.

Tip: Do not kink or bend hoses sharply.

Using Wash Programmes

Select programme based on fabric type and soil level.

  1. Sort laundry: By colour and fabric type.
  2. Load machine: Do not overload; clothes should move freely.
  3. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
  4. Select programme: Turn knob to desired programme.
  5. Select options: Press Extra Rinse, Delay, etc. as needed.
  6. Start: Press START/PAUSE; door locks automatically.
  7. After cycle: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during cycle; wait for door lock light to go off.

Special Functions

Delay Start: Set 1-24 hours. Child Lock: Locks controls. AquaStop: Automatic shut-off if leak detected. Drum Clean: Run monthly with detergent to prevent mould.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly. Clean filter every 3 months. Wipe exterior with damp cloth.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

CE marked. Complies with UK electrical safety standards. Waste disposal: Contact local authority for recycling. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug is in socket; press Start.
No water intakeTap off/hose kinkedOpen tap; straighten hose; check for blockages.
Excessive vibrationTransit bolts/levelEnsure transit bolts removed; re-level machine.
Water not drainingFilter/drain blockedClean pump filter; check drain hose for kinks.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 mins, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint Washing Machine FDL 754 P UK Manual © - All Rights Reserved 2025