Hotpoint Washing Machine FDG 8620 IT Manual

The Hotpoint FDG 8620 IT is a freestanding front-loading washing machine with a 6kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1200 RPM, delay timer, child lock, and anti-flood protection. Designed for standard European household use (220-240V, 50Hz). Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and power cord.

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

1. Position machine: Ensure at least 1cm clearance from walls; do not install behind lockable door.
2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and/or hot water tap (red marker) if applicable.
3. Connect drain hose: Place in standpipe (min height 60cm, max 100cm) or over sink edge.
4. Level the machine: Adjust front feet using spanner; check with spirit level.
5. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Remove all transit bolts before use to prevent severe damage. Ensure water connections are tight to avoid leaks.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

1. Open water taps fully.
2. Plug in power cord and press POWER button.
3. Turn program selector to "Cotton 90°C" (or specific "Drum Clean" program if available).
4. Add a small amount of detergent (optional) and press START/PAUSE.
5. Let cycle complete. The machine is now ready for use.

CAUTION! Do not load laundry during first cleaning cycle. Ensure transit bolts are removed.

Specifications

• Model: FDG 8620 IT
• Capacity: 6kg
• Dimensions (HxWxD): 85cm x 60cm x 55cm (approx)
• Energy Rating: A+++
• Water Consumption: ~50 liters per cycle (average)
• Spin Speed: 1200 RPM (max)
• Programs: 12+ including Cotton, Eco, Quick 30', Delicates, Wool, Sport, Jeans
• Noise Level: Wash: 56 dB; Spin: 76 dB
• Power Supply: 220-240V, 50Hz, 10A
• Weight: ~65kg

Controls and Settings

Control Panel: POWER button, Program selector knob, Temperature button, Spin speed button, Delay Start button, Option buttons (e.g., Extra Rinse, Prewash), START/PAUSE button, Display.

Basic Operation: 1. Turn POWER on. 2. Load laundry and close door. 3. Select program with knob. 4. Adjust temperature/spin if needed. 5. Press START/PAUSE.

Options: Delay Start (1-24h), Extra Rinse (for sensitive skin), Prewash (for heavily soiled items), Reduced Creases (slower final spin).

Child Lock: Press and hold DELAY and TEMPERATURE buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water supply; red hose to hot water (if machine supports hot fill). Use only supplied hoses; do not reuse old ones.

1. Ensure tap washers are in place.
2. Screw hoses hand-tight, then tighten a further quarter-turn with pliers (do not overtighten).
3. Drain hose: Secure in standpipe (diameter min 4cm) or over sink edge using hook. Ensure no kinks.

Tip: Check for leaks at connections after first use. Always turn off taps when machine not in use for long periods.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry by color and fabric type.
2. Load evenly, do not exceed 6kg (dry weight).
3. Add detergent to dispenser drawer (compartments: I-Prewash, II-Main wash, *-Fabric softener).
4. Close door firmly (audible click).
5. Select program (e.g., Cotton 40°C for everyday laundry).
6. Adjust options (e.g., spin speed for delicate items).
7. Press START/PAUSE. Display shows time remaining.
8. At cycle end, door unlocks (may take few minutes). Remove laundry promptly.

WARNING! Do not open door during wash or spin cycle. Wait for door lock symbol to disappear.

Special Functions

Delay Start: Set wash to finish at desired time. Press DELAY repeatedly to set hours (1-24h).

Child Lock: Prevents accidental program changes. Activated by holding two buttons (see Controls).

Anti-Crease: Reduces spinning speed at end of cycle to minimize wrinkles.

Rinse Hold: Stops cycle with water in drum if you cannot unload immediately (press START/PAUSE to drain and spin).

Care & Cleaning

Regular maintenance ensures longevity and performance.

1. Clean detergent drawer monthly: Pull out, rinse under tap, dry, and reinsert.
2. Clean door seal: Wipe rubber gasket to remove lint and residue; check for foreign objects.
3. Clean filter: Locate at bottom front (behind small cover). Place towel, open cap slowly to drain residual water, remove filter, clean under running water, reinsert.
4. Run drum clean cycle every 30 washes (use hot cotton program or specific cleaner).

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE Marked: Complies with European safety and EMC directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle at designated facility. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. If error persists, contact service.

Service: Authorized Hotpoint service centers; www.hotpoint.eu/support