Hotpoint washing machine FDEU 8640 P UK manual

The Hotpoint FDEU 8640 P is a freestanding 8kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programmes including Cotton, Synthetics, Delicates, Wool, and Quick Wash. It features a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Drum, detergent drawer, control panel, digital display, power cord, water inlet hoses, drain hose.

Feature	Description
Capacity	8kg load capacity
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM
Digital Display	Shows time, programme, and settings
Delay Start	Delay washing up to 24 hours
Child Lock	Locks control panel during operation
Anti-Flood Protection	Prevents water leaks
Quick Wash	30-minute programme for lightly soiled loads
Detergent Drawer	Compartments for pre-wash, main wash, and softener
Door Lock	Automatic door lock during cycle

Installation

Unpack and inspect contents. Place on level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust feet using spanner; ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure.

First-Time Setup

Power on machine; run initial empty wash.

Set language: Press and hold START/PAUSE and PROGRAMME buttons for 3 seconds to select language.
Load detergent: Add 100ml of detergent to drawer compartment II for main wash.
Select programme: Turn dial to "Cotton 60°C".
Start cycle: Press START/PAUSE; machine will run empty wash to clear residues.
Set child lock: Press and hold CHILD LOCK button for 3 seconds to activate.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: FDEU 8640 P UK
Capacity: 8kg
Energy Rating: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5-10 bar
Programmes: Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco 40-60, Sport, Jeans
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)

Controls and Settings

Control Panel: Programme dial, digital display, START/PAUSE, OPTION buttons, CHILD LOCK.

Programme Dial: Select wash programmes (Cotton, Synthetics, etc.).

Options: Delay Start (1-24h), Extra Rinse, Pre-Wash, Speed Wash, Reduced Creases. Display: Shows time remaining, programme, and selected options. Settings: Temperature selection (cold to 90°C), spin speed (0-1400 RPM), child lock activation.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water tap. Drain: Place hose in standpipe (max height 1m).

Turn off water tap before connecting hoses.
Ensure hose washers are fitted to prevent leaks.
Secure drain hose to prevent slipping.
Check for kinks in hoses.

Tip: Run first wash without laundry to check for leaks.

Using Wash Programmes

Supports various fabrics and soil levels.

Load laundry: Open door, load up to 8kg, close door securely.
Add detergent: Pour into compartment II (main wash) and I (pre-wash if selected).
Select programme: Turn dial to desired programme (e.g., Cotton for cottons).
Adjust settings: Press OPTION buttons for temperature, spin speed, extra rinse.
Start: Press START/PAUSE; door locks and cycle begins.
Pause: Press START/PAUSE to pause; door unlocks after 2 minutes.
End of cycle: Signal sounds; remove laundry promptly to avoid creases.

WARNING! Do not overload drum; balance large items like sheets.

Special Functions

Delay Start: Set delay up to 24 hours. Child Lock: Locks controls during cycle. Anti-Crease: Reduces spinning at end to minimise wrinkles. Quick Wash: 30-minute cycle for small, lightly soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean programme every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep door open between washes to prevent mould.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0333 305 2265.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power/door	Check plug is in; ensure door is closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure water taps are on; check hoses for kinks; clean inlet filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load evenly; level machine.
Water not draining	Drain hose	Check drain hose for kinks; clean pump filter; ensure standpipe not blocked.
Error codes on display	Fault	Refer to manual for code meaning (e.g., F01 = water inlet fault).

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 2265; www.hotpoint.co.uk