Hotpoint washing machine FDD 9640P UK manual

The Hotpoint FDD 9640P is a freestanding 9kg washing machine with 1400 RPM spin speed, featuring AquaCare technology for gentle fabric care, Direct Spray for efficient rinsing, Anti-Stain removal programs, Steam Refresh cycle, and a large LED display with rotary dial control. It includes multiple wash programs, delay start, child lock, and energy efficiency class A. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum capacity, LED display, Rotary program selector, Detergent dispenser, Water inlet filters, Drain pump, Adjustable feet, Power cord.

Feature	Description
AquaCare technology	Gentle washing action to protect fabrics
Direct Spray	Efficient rinsing system
Anti-Stain programs	Targeted removal of specific stains
Steam Refresh cycle	Reduces wrinkles and odours without washing
1400 RPM spin speed	High spin for reduced drying time
Delay start	Program start delay up to 24 hours
Child lock	Locks control panel during operation
Large LED display	Shows time, cycle stage, and settings
Quick wash program	30-minute cycle for lightly soiled loads
Energy class A	High energy efficiency rating

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using spanner; ensure machine is stable.
Connect water supply: Attach inlet hoses to hot/cold taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Plug into grounded socket.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and run initial empty wash.

Check water connections: Turn on taps; check for leaks.
Select first wash: Turn dial to "Cotton 90°C" without laundry.
Add detergent: Pour 100ml detergent into compartment II.
Start cycle: Press Start/Pause; let complete to clean drum.
Set preferences: Use Settings button for buzzer volume, etc.

CAUTION! Ensure machine is level to prevent vibration. Keep packaging away from children.

Specifications

Capacity: 9kg (cotton).
Spin Speed: Up to 1400 RPM.
Energy Rating: A (EU scale).
Water Pressure: 0.5-10 bar (cold/hot inlet).
Programs: 15 programs including Cotton, Synthetics, Delicates, Wool, Anti-Stain, Steam.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 230-240V, 50Hz, 10A.
Noise Level: 53 dB (washing), 75 dB (spinning).
Weight: 70 kg.

Controls and Settings

Control Panel: Rotary dial (program selector), LED display, Start/Pause, Delay Start, Child Lock, Settings button.

Programs: Cotton (20°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Silk, Sportswear, Jeans, Anti-Stain, Steam Refresh, Quick 30', Rinse & Spin, Drain Only.

Settings: Press Settings button to adjust buzzer volume (Off/1/2/3), end of cycle signal, button sound. Delay Start: Press Delay repeatedly to set 1-24 hours. Child Lock: Press and hold Child Lock for 3 seconds; repeat to disable.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue cold, red hot). Drain: Place hose in standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not lengthen.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Install drain hose at correct height to prevent siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9kg; distribute evenly.
Add detergent: Use compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn dial (e.g., Cotton for linens).
Adjust options: Press Temperature or Spin to modify if needed.
Start: Press Start/Pause; display shows time remaining.
Pause: Press Start/Pause to interrupt; door locks during wash.
End of cycle: Buzzer sounds; door unlocks after 2 minutes.

WARNING! Do not open door during spin. Remove items promptly after cycle.

Special Functions

Anti-Stain: Select program (Wine, Grass, etc.) for targeted stain removal. Steam Refresh: 20-minute cycle to refresh clothes. Delay Start: Set start time for off-peak energy use. Child Lock: Prevents accidental program changes.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, and filters.

Detergent drawer: Pull out; rinse under tap.
Drum: Run "Drum Clean" program (90°C) without laundry.
Inlet filters: Turn off taps; unscrew hoses; clean filters.
Drain pump filter: Open flap at front; place container; unscrew filter; remove debris.

CAUTION! Unplug before cleaning filters. Do not use abrasive cleaners.

Regulatory Information

EU Ecodesign and Energy Label regulations compliant. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste; recycle at designated facility. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 0333 305 2265 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug socket; ensure door closed properly; press Start.
No water intake	Taps/filters	Ensure taps on; check inlet hoses not kinked; clean filters.
Excessive vibration	Transit bolts/level	Ensure transit bolts removed; adjust feet for level floor.
Water not draining	Drain hose/filter	Check hose not blocked or bent too high; clean pump filter.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes; retry.

Reset: Unplug for 5 minutes; plug back in.

Service: 0333 305 2265; www.hotpoint.co.uk