Hotpoint washing machine FDD 9640K UK manual

The Hotpoint FDD 9640K is a freestanding 9kg washing machine with a 1400 rpm spin speed, featuring an A+++ energy rating, multiple wash programs including a 15-minute quick wash, anti-allergy cycle, and direct injection technology for precise detergent dosing. It includes delay start, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent drawer with direct injection, water inlet hoses, drain hose, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
2. Connect drain hose: Place into standpipe or sink, secure with provided hook if needed.
3. Level the machine: Adjust the four feet using a spanner until the machine is stable and does not rock.
4. Plug into a grounded 220-240V AC power socket.

WARNING! Do not remove transit bolts before moving the machine. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash to clean the drum.

1. Remove any remaining packaging from inside the drum.
2. Connect water and power, ensure the door is closed.
3. Select the "Cotton" program at 90°C without any laundry.
4. Add a small amount of detergent to the main wash compartment and start the cycle.
5. After completion, the machine is ready for normal use.

CAUTION! The machine is heavy; use two people for positioning. Ensure it is not installed behind a lockable door.

Specifications

• Model: Hotpoint FDD 9640K UK
• Type: Freestanding Front Loader
• Capacity: 9 kg
• Max Spin Speed: 1400 rpm
• Energy Class: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: Approx. 45 litres per cycle (Cotton 60°C)
• Noise Level (Wash/Spin): 53 dB / 75 dB
• Dimensions (HxWxD): 85 x 60 x 59 cm
• Mains Supply: 220-240V ~ 50Hz

Controls and Settings

Access programs and options via the rotary dial and touch buttons.

Control Panel: Rotary Program Selector, Start/Pause button, Delay Start button, Option buttons (e.g., Extra Rinse, Pre-Wash), Child Lock button, Display.

Programs: Cotton, Synthetics, Delicates, Wool, Quick 15', Anti-Allergy, Sport, Jeans, Drum Clean. Options: Temperature selection, Spin speed reduction, Extra Rinse, Pre-Wash. Settings: Delay start (1-24 hrs), Child Lock (press for 3 seconds), Reset (hold Start/Pause for 5 seconds).

Connecting Water & Drain

Water Inlet: Cold water connection is mandatory. Hot water connection is optional. Drain: Use the provided hose into a standpipe (min height 60cm, max 100cm from floor) or over a sink.

1. Turn off water taps before connecting hoses.
2. Connect the inlet hoses to the corresponding valves (blue for cold, red for hot) on the machine.
3. Secure the drain hose to prevent slipping.
4. After connections, turn on taps and check for leaks before first use.

Tip: Do not kink or extend the drain hose beyond 1.5 metres.

Using Wash Programs

Select the appropriate program for your laundry type.

1. Load laundry: Open door, load items loosely, do not overload.
2. Add detergent: Use the Direct Injection drawer (compartment II for main wash, I for pre-wash, * for softener).
3. Select program: Turn the dial to the desired program (e.g., Cotton).
4. Set options: Press buttons to adjust temperature, spin speed, or add Extra Rinse.
5. Start: Press Start/Pause. The door locks and the cycle begins. Time remaining is shown on the display.
6. At the end: A tone sounds. Wait for the door lock symbol to go out before opening.

WARNING! Do not open the door during a wash or spin cycle. Ensure pockets are empty of coins and objects.

Special Features

Direct Injection: Precisely doses detergent and softener at the right time for better results and less waste. Anti-Allergy Cycle: Heats water to a specific temperature to help reduce common allergens. Delay Start: Set the machine to finish at a convenient time. Child Lock: Prevents program changes during operation (activate by pressing button for 3 seconds).

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean the detergent drawer: Pull out, rinse under warm water, and dry before replacing.
2. Clean the door seal: Wipe the rubber gasket to remove lint and residue, leaving the door ajar after use to dry.
3. Run Drum Clean program: Every 30 washes or monthly, run this program without laundry to clean the drum and internal pipes.
4. Clean the filter: Located behind the lower kickplate. Place a towel, unscrew the filter cap slowly to drain residual water, clean the filter, and retighten.

CAUTION! Unplug the machine before cleaning the filter. Do not use abrasive cleaners on the exterior.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). The symbol on the product or packaging indicates that this product must not be disposed of with other household waste. For proper treatment, recovery, and recycling, please take it to a designated collection point. For support in the UK, visit www.hotpointservice.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug the machine for 2 minutes, then plug back in.

Service: For UK: 03448 113 113; www.hotpointservice.co.uk