Hotpoint washing machine FDD 9640G UK manual

The Hotpoint FDD 9640G is a freestanding 9kg washing machine with a 1400 RPM spin speed, featuring an A+++ energy rating, a variety of wash programmes including a 15-minute quick wash, anti-allergy cycle, and steam refresh option. It includes a digital display, delay start timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main washing drum, detergent dispenser drawer, digital control panel, water inlet valves, drain pump filter, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable) using supplied connectors.
2. Connect drain hose: Place hose into standpipe or sink, ensuring it is secure and not kinked.
3. Level the machine: Adjust the feet using a spanner until the machine is stable and does not rock.
4. Plug into a grounded 220-240V AC power outlet.

WARNING! Do not remove transit bolts before moving the machine. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run a maintenance wash to clear any residual water.

1. Remove transit bolts: Use spanner to remove bolts from rear panel and fit caps.
2. Run initial wash: Select the "Drum Clean" or a 90° cotton programme without laundry.
3. Set preferences: Use the control dial and buttons to set language, time, and default options.
4. Load detergent: Fill detergent, softener, and pre-wash compartments as needed.

CAUTION! Ensure the machine is level to prevent excessive vibration and noise during spin cycles.

Specifications

• Model: FDD 9640G UK.
• Type: Freestanding front-load washing machine.
• Capacity: 9kg.
• Spin Speed: 1400 RPM.
• Energy Rating: A+++.
• Water Supply: Cold fill (can be connected to hot if desired).
• Programmes: Cotton, Synthetic, Delicates, Wool, Quick Wash, Anti-Allergy, Steam Refresh, Drum Clean.
• Dimensions (HxWxD): 85cm x 60cm x 60cm (approx).
• Power Supply: 220-240V AC, 50Hz.

Controls and Settings

Control Panel: Programme dial, digital display, start/pause button, option buttons (e.g., temperature, spin speed, delay).

Programme Dial: Select from various wash programmes. Digital Display: Shows selected programme, time remaining, temperature, spin speed, and options. Option Buttons: Adjust temperature (cold to 90°C), spin speed (0 to 1400 RPM), delay start (1-24 hrs), and extra rinse. Start/Pause: Starts or pauses the selected programme. Child Lock: Press and hold specific buttons to lock/unlock controls.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (usually cold water supply). Drain: Place hose securely into standpipe or sink.

1. Turn off water taps before connecting hoses.
2. Ensure inlet hose filters are clean and connections are hand-tight plus a quarter turn.
3. The drain hose should be placed between 60cm and 100cm high to prevent siphoning.
4. After connections, turn on taps and check for leaks before first use.

Tip: Use only the supplied hoses; do not use old hoses from previous appliances.

Using Wash Programmes

Supports various fabrics and soil levels.

1. Sort laundry: Separate by colour and fabric type.
2. Load machine: Do not overload; leave space for items to move freely.
3. Add detergent: Use drawer compartments for detergent, softener, and pre-wash.
4. Select programme: Turn dial to desired programme (e.g., Cotton, Synthetic).
5. Adjust options: Set temperature, spin speed, and extra functions if needed.
6. Start: Press Start/Pause button; the display will show time remaining.
7. After wash: Remove laundry promptly; leave door ajar to dry drum interior.

WARNING! Do not wash items contaminated with flammable substances. Check pockets for coins and objects.

Special Features

Delay Start: Set to start wash later (1-24 hours). Child Lock: Prevents accidental programme changes. Anti-Allergy: High-temperature wash and extra rinses to reduce allergens. Steam Refresh: Uses steam to freshen and reduce wrinkles without a full wash.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer and door seal regularly. Run "Drum Clean" programme monthly.

CAUTION! Do not use abrasive cleaners or solvents. Clean the pump filter periodically to remove debris.

Regulatory Information

Complies with UK and EU safety and energy efficiency standards. CE marked. For support, visit www.hotpoint.co.uk or contact 03448 225 225. This appliance is marked according to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 03448 225 225; www.hotpoint.co.uk