Hotpoint Washing Machine FDD 9640B IT Manual

The Hotpoint FDD 9640B IT is a freestanding washing machine with a 9 kg load capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, anti-flood system, and anti-vibration design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ for high efficiency
Display	Digital LED with time remaining
Programs	15+ including Cotton, Synthetic, Delicate, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Anti-Vibration	Stable during spin cycle
Noise Level	Low noise operation

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn clockwise/anti-clockwise to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (blue mark) and hot if applicable (red mark).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and power on; run initial empty wash.

Set language: Press and hold PROGRAM + OPTION for 3 seconds to select ITALIANO (default).
Run cleaning cycle: Select "Drum Clean" program without laundry and detergent.
Check for leaks: Observe connections during first fill.
Load laundry: Do not exceed 9 kg; distribute evenly.

CAUTION! Ensure machine is level to prevent excessive vibration.

Specifications

Model: FDD 9640B IT
Capacity: 9 kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 50 litres per cycle (cotton 60°C)
Power Supply: 230-240V, 50Hz
Dimensions (HxWxD): 85 x 60 x 60 cm
Programs: Cotton, Eco Cotton, Synthetic, Delicate, Wool, Quick 15', Sport, Jeans, Anti-Allergy, Drum Clean
Noise Level: Wash 53 dB, Spin 75 dB
Weight: 70 kg

Controls and Settings

Access settings via rotary dial and button panel. Display shows time, temperature, spin speed.

Buttons: POWER, START/PAUSE, OPTION (temperature, spin, extra rinse), DELAY, CHILD LOCK.

Program Selection: Turn dial to desired program (e.g., Cotton 60°C). Options: Adjust temperature (cold-90°C), spin speed (0-1400 RPM), extra rinse, pre-wash. Delay Start: Press DELAY, set hours (1-24). Child Lock: Press and hold CHILD LOCK for 3 seconds; repeat to disable.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not lengthen.
Secure drain hose to prevent slipping.
Check for kinks in hoses.

Tip: Install AquaStop valve (optional) for extra flood protection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, place items evenly in drum.
Add detergent: Pour into dispenser compartments (I=pre-wash, II=main wash, *=fabric softener).
Select program: Turn dial (e.g., Synthetic 40°C).
Adjust options: Press OPTION to change temperature, spin, extra rinse.
Start: Press START/PAUSE; display shows time remaining.
Pause: Press START/PAUSE to stop; door locks during wash.
End: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes; risk of scalding.

Special Functions

Delay Start: Set wash to begin later (press DELAY, use arrows). Child Lock: Prevents changes (hold CHILD LOCK 3 sec). Anti-Allergy: Extra rinse for sensitive skin. Drum Clean: Runs high-temperature cycle without laundry (use monthly).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program regularly.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE marked; complies with EU directives. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact 0333 305 3515 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug; ensure door closed properly; press START.
No water intake	Taps/hoses	Open taps; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Water does not drain	Drain hose/filter	Check hose position; clean pump filter.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 3515; www.hotpoint.eu