Hotpoint washing machine EU RSSG 725 S IT manual

The Hotpoint EU RSSG 725 S IT is a freestanding washing machine with a 7 kg load capacity, energy efficiency class A, 1200 RPM spin speed, and multiple wash programs. It features electronic controls, a delay timer, child lock, anti-crease function, and imbalance detection. Designed for standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, filter, inlet hoses, drain hose.

Feature	Description
Control Panel	Digital display with program selector and function buttons
Detergent Dispenser	Compartments for detergent, softener, and pre-wash
Drum Capacity	7 kg maximum load
Spin Speed	Up to 1200 RPM adjustable
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles at end of cycle
Imbalance Detection	Automatically redistributes load
Energy Class	A rating for efficient operation
Quick Wash	30-minute program for lightly soiled items

Installation

Unpack and remove transit bolts. Place on level floor.

Connect water supply: Attach inlet hoses to cold and hot water taps (if applicable).
Connect drain hose: Place in sink or standpipe; secure to avoid slipping.
Level the machine: Adjust feet until machine is stable; use spirit level.
Plug into grounded power outlet.

WARNING! Remove all transit bolts before use to prevent damage. Ensure water connections are tight.

First-Time Setup

Plug in machine; run initial empty wash.

Select language: Press SETTINGS button to choose display language.
Run test cycle: Use Cotton program at 90°C without laundry to clean drum.
Set water hardness: In settings menu, adjust based on local water quality.
Familiarize with controls: Review program chart for appropriate wash selections.

CAUTION! Ensure machine is level to prevent vibration and noise during spin.

Specifications

Capacity: 7 kg.
Energy Class: A.
Spin Speed: 1200 RPM (adjustable).
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, etc.
Water Supply: Cold and hot (optional) inlet.
Power Supply: 220-240V, 50Hz.
Dimensions (HxWxD): 85 x 60 x 55 cm approx.
Noise Level: Wash: 56 dB; Spin: 76 dB.

Controls and Settings

Access settings via control panel. Buttons: POWER, START/PAUSE, PROGRAM SELECTOR, OPTIONS (temperature, spin, delay).

Display: Shows program time, temperature, spin speed, delay time, and error codes.

Programs: Cotton (40°C-90°C), Synthetic (40°C-60°C), Delicate (cold-30°C), Wool (cold-30°C), Quick Wash (30 min). Options: Temperature selection, spin speed reduction, extra rinse, pre-wash. Settings: Child lock (press and hold for 3 sec), water hardness, acoustic signals.

Connecting Utilities

Water: Connect hoses to taps; ensure washers are fitted. Drain: Secure hose at 60-100 cm height. Power: Use dedicated socket.

Turn off water taps and power before connecting.
Check hose condition; replace if damaged.
After connection, open taps fully and check for leaks.

Tip: Do not extend drain hose beyond 1.5 meters to maintain pump efficiency.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, place items loosely in drum.
Add detergent: Pour into correct dispenser compartment.
Select program: Turn selector to desired program.
Adjust options: Press temperature, spin, or extra rinse as needed.
Start: Press START/PAUSE; machine will begin cycle.
Pause/change: Press START/PAUSE to stop; wait for door lock to release.
End of cycle: Acoustic signal sounds; remove laundry promptly.

WARNING! Do not overload drum. Balance load for even washing and spinning.

Special Functions

Delay Timer: Set start time up to 24 hours in advance. Child Lock: Enable to lock controls during cycle. Anti-Crease: Drum rotates periodically after cycle to reduce wrinkles. Imbalance Detection: Automatically adjusts spin speed if load is uneven.

Care & Cleaning

Unplug before maintenance. Clean detergent dispenser monthly; run drum clean program every 30 cycles. Check and clean filter periodically.

CAUTION! Do not use abrasive cleaners on surfaces. Keep area around machine dry.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured under ISO 9001 standards. Copyright © Hotpoint; trademarks owned by Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug and power; ensure door is closed properly.
No water intake	Taps/hoses/filter	Ensure taps are open; check hoses for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Verify transit bolts removed; re-level machine on floor.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Error code on display	Various faults	Consult manual error code list; reset machine by unplugging.

Reset: Unplug for 1 minute to reset electronic control.

Service: Contact authorized Hotpoint service; www.hotpoint.eu