Hotpoint washing machine CAWD 129 (EU) manual

The Hotpoint CAWD 129 is a freestanding washing machine with a 9 kg load capacity, energy efficiency class A+++, 1400 rpm spin speed, and multiple wash programs including Cotton, Synthetics, Delicates, Wool, and Quick Wash. It features a digital display, delay timer, child lock, and anti-flood protection. Designed for 230V~50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, adjustable feet, and power cord.

FeatureDescription
Capacity9 kg maximum load
Energy ClassA+++ (most efficient)
Spin SpeedUp to 1400 rpm
Programs15 programs including Eco 40-60
DisplayDigital with time remaining indicator
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodAquaStop protection system
Door LockAutomatic during operation
Adjustable FeetFor leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on solid, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
  3. Connect drain hose: Place in sink or secure to drain pipe (max height 1m).
  4. Level the machine: Adjust front feet using spanner; check with spirit level.
  5. Plug into grounded power outlet (230V~50Hz).

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Press POWER button; display lights up.
  2. Run empty wash: Select Cotton program at 90°C without laundry.
  3. Set water hardness: In settings menu, adjust based on local water (1-4).
  4. Load detergent: Fill drawer compartments as per instructions.
  5. Select program: Turn program selector knob to desired setting.

CAUTION! Ensure packaging materials are fully removed. Check for water leaks after first connection.

Specifications

Controls and Settings

Control Panel: POWER button, program selector knob, display, option buttons.

Display Symbols: Time remaining, child lock, delay start, spin speed, temperature.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Options: Press corresponding button to adjust spin speed (400-1400 rpm), temperature (cold-90°C), delay start (1-24h). Settings Menu: Hold OPTIONS button for 3 seconds to access water hardness, acoustic signals, factory reset.

Connecting Water & Drain

Water Inlet: Cold water only (hose supplied). Drain: Hose diameter 19 mm.

  1. Ensure water tap is off before connecting hose.
  2. Connect inlet hose to machine (right rear connection).
  3. Connect other end to cold water tap; tighten by hand plus half turn.
  4. Place drain hose in sink or connect to drain pipe (max height 1m).
  5. Open water tap fully; check for leaks.

Tip: Do not kink or bend hoses sharply. Use hose clips if provided.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 9 kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
  3. Select program: Turn knob (e.g., Cotton for towels/bed linen).
  4. Adjust options: Press buttons to set temperature, spin speed, delay.
  5. Start: Press START/PAUSE; door locks automatically.
  6. After wash: Wait for door lock symbol to disappear before opening.

WARNING! Do not wash items contaminated with flammable substances. Remove coins/objects from pockets.

Special Functions

Delay Start: Set 1-24 hours; machine starts automatically. Child Lock: Press and hold CHILD LOCK button for 3 seconds; prevents changes. Extra Rinse: Adds additional rinse cycle. Half Load: Reduces water for smaller loads. Rapid Wash: 30-minute cycle for lightly soiled items.

Care & Cleaning

Monthly maintenance recommended.

  1. Clean detergent drawer: Remove and rinse under warm water.
  2. Clean drum: Run empty Cotton program at 90°C with washing machine cleaner.
  3. Clean filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter; clean; reinsert.
  4. Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use steam cleaners.

Regulatory Information

CE Mark: Complies with EU directives. Waste Electrical regulations: Dispose at designated collection points. Manufacturer: Hotpoint, a Haier company. For EU product registration and support, visit www.hotpoint.eu or contact local service center. Energy label according to EU regulation 2019/2014.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug; ensure door closed properly; press START/PAUSE.
No water intakeTap/hoseEnsure water tap on; check hose for kinks; clean inlet filter.
Water doesn't drainDrain filterClean pump filter; check drain hose height (<1m).
Excessive vibrationTransit bolts/loadEnsure transit bolts removed; redistribute laundry; level feet.
Error codes (E01-E10)Various faultsConsult manual; unplug for 5 minutes; restart. If persists, call service.

Reset: Unplug for 5 minutes or hold START/PAUSE for 10 seconds.

Service: EU service network: see www.hotpoint.eu/service

Hotpoint washing machine CAWD 129 (EU) manual © - All Rights Reserved 2025