Hotpoint washing machine BI WMHL 71453 UK manual

The Hotpoint BI WMHL 71453 is a freestanding washing machine with a 7kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, delay start, child lock, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital display, Program selector knob, Start/Pause button, Delay start button, Child lock button, Detergent dispenser drawer, Door with safety lock.

Feature	Description
Capacity	7kg laundry load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++
Display	Digital with time remaining indicator
Programs	Multiple including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Safety lock during operation
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Dimensions (HxWxD)	850 x 595 x 545 mm

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure with U-bend.
Level the machine: Adjust feet using spanner; use spirit level.
Plug into 220-240V AC power socket.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in and run initial empty wash.

Set language: Press and hold Start/Pause for 3 seconds to cycle display language.
Run test cycle: Select Cotton 90°C program without laundry; add detergent; run to clean drum.
Adjust leveling: Check for excessive vibration; readjust feet if needed.
Set default options: Use Settings menu to set beep volume, default temperature, etc.

CAUTION! Remove all packaging materials and transit bolts before first use.

Specifications

Model: BI WMHL 71453 UK
Capacity: 7kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 45 litres per cycle (Cotton 60°C)
Programs: 15 programs including Eco, Wool, Hand Wash, Spin Only
Noise Level: 53 dB (washing), 73 dB (spinning)
Power Supply: 220-240V AC, 50Hz
Dimensions: 850 x 595 x 545 mm
Weight: 68 kg

Controls and Settings

Access settings via control panel. Program knob: Turn to select wash program. Buttons: Start/Pause, Delay Start, Child Lock, Option (for extra rinse, pre-wash, etc.).

Display: Shows time remaining, program stage, temperature, spin speed, and options selected.

Settings Menu: Press and hold Option + Start for 3 seconds to access. Adjust: Default temperature, spin speed, beep volume, end-of-cycle signal. Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate. Delay Start: Press to set delay (1-24 hours).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Place hose in standpipe (max height 100 cm) or over sink edge.

Turn off taps before connecting hoses.
Use only supplied hoses; do not overtighten.
Ensure drain hose is not kinked or submerged.
Check for leaks after first connection.

Tip: Use hose clips if provided; ensure standpipe diameter is at least 4 cm.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pull dispenser drawer; add to appropriate compartments.
Select program: Turn knob to desired program (e.g., Cotton, Synthetics).
Set options: Press Option button for extra rinse, pre-wash, etc.
Set temperature/spin: Use +/- buttons if program allows adjustment.
Start: Press Start/Pause; door locks automatically.
Pause/Stop: Press Start/Pause to pause; press again to resume. To cancel, hold for 3 seconds.
After cycle: Door unlocks; remove laundry promptly.

WARNING! Do not open door during wash/spin; wait for unlock signal. Check pockets for objects.

Safety Features

Child Lock: Prevents program changes; activate via button. Door Lock: Automatically locks during operation; unlocks at end. Overflow Protection: Automatically stops water if detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep control panel dry. Clean filter every 3 months.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door/child lock	Check plug socket; ensure door closed; deactivate child lock.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose for kinks/blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling/load	Ensure transit bolts removed; relevel machine; redistribute load.
Error codes on display	Various faults	Refer to manual error code list; common: E10 (water issue), E20 (drain issue).

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk