Hotpoint washing machine BI WMHG 91485 UK manual

The Hotpoint BI WMHG 91485 UK is a freestanding washing machine with a 9kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray for efficient rinsing, a large LED display, delay start, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg drum, LED control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	9kg (cotton)
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Anti-Stain Technology	Automatic stain removal for common stains
Direct Spray	Continuous water spray during rinse for better detergent removal
Programs	16 programs including Cotton, Synthetic, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
LED Display	Shows time remaining, cycle stage, and settings
Door Lock	Automatic during operation

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if using dual supply).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust front feet using spanner; use spirit level.
Plug into grounded power socket.

WARNING! Do not install in areas below 0°C. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in and run a maintenance wash.

Open water taps fully.
Add detergent to drawer compartment II (main wash).
Select "Cotton 90°C" program without laundry.
Press Start to clean drum and remove manufacturing residues.
Set preferences: Use Settings button to adjust buzzer volume, default spin speed, etc.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: BI WMHG 91485 UK
Capacity: 9kg (cotton)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Spin Speed: 1400 RPM (adjustable)
Energy Consumption: 0.80 kWh per cycle (cotton 60°C)
Water Consumption: 52 litres per cycle (cotton 60°C)
Noise Level: 53 dB (washing), 75 dB (spinning)
Programs: 16 including Eco 40-60, Wool, Sport, Anti-Allergy
Supply Voltage: 220-240V, 50Hz
Max Load: 9kg (cotton), 4kg (synthetic), 2kg (wool)

Controls and Settings

Control Panel: Program selector knob, LED display, Start/Pause, Delay Start, Settings, Extra Rinse, Anti-Stain, Speed/Spin reduction buttons.

Programs: Cotton (20°C-90°C), Synthetic, Delicates, Quick Wash (30 mins), Wool, Silk, Sport, Anti-Allergy, Drum Clean.

Settings Menu: Press Settings button to access buzzer volume (0-3), default spin speed, temperature adjustment, end of cycle signal. Child Lock: Press and hold Delay Start + Anti-Stain for 3 seconds. Delay Start: Set 1-24 hours delay. Extra Options: Extra Rinse, Anti-Stain, Speed Reduction (for delicate fabrics).

Connecting Water & Drain

Water Inlet: Cold (mandatory) and hot (optional) hose connections. Drain: Hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Use drain hose extension if needed (max 150cm).

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed max weight.
Add detergent: Use compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Adjust options: Extra Rinse, Anti-Stain, Temperature, Spin Speed.
Press Start/Pause to begin.
At end, door unlocks (may take 2 minutes); remove laundry promptly.

WARNING! Do not wash waterproof items (e.g., raincoats) to avoid imbalance.

Special Functions

Anti-Stain: Automatically adjusts temperature and time for common stains (grass, wine, etc.). Direct Spray: Improves rinse efficiency. Delay Start: Program start later (e.g., for off-peak electricity). Child Lock: Disables controls except power.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Pull out, rinse under tap.
Door seal: Wipe with damp cloth to remove lint.
Filter: Turn off machine, open filter cover (front bottom), place towel, unscrew filter, clean.
Run Drum Clean program monthly (without laundry).

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug socket; ensure child lock is off.
No water intake	Taps off/hose kinked	Open taps; straighten hoses; check water pressure.
Water doesn't drain	Drain blocked/filter clogged	Clean filter; ensure drain hose is not too high (max 100cm).
Excessive vibration	Transit bolts not removed/uneven floor	Remove transit bolts; re-level machine; redistribute laundry.
Error codes (e.g., F01)	Motor/drain/sensor fault	Unplug for 5 minutes; restart. If persists, call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk