Hotpoint washing machine BI WMHG 81484 UK manual

The Hotpoint BI WMHG 81484 is a freestanding washing machine with an 8kg load capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programmes including Cotton, Synthetic, Delicates, Wool, and Quick Wash, along with delay start, child lock, and anti-crease functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum door, adjustable feet, water inlet hoses, drain hose.

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if required (red marker).
3. Connect drain hose: Place in standpipe (min 60cm height) or over sink edge using hook.
4. Level the machine: Adjust front feet using spanner; ensure machine does not rock.
5. Plug into 220-240V AC, 50Hz power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Check installation: Ensure hoses are secure, transit bolts removed, machine level.
2. Run empty drum clean: Select "Drum Clean" programme (if available) or 90°C cotton cycle without laundry.
3. Set preferences: Use control dial and buttons to set default options like spin speed, temperature.
4. Load detergent: Fill drawer compartments as per detergent manufacturer instructions.

CAUTION! Use only HE (High Efficiency) detergent suitable for front-loading washing machines.

Specifications

• Model: BI WMHG 81484 UK
• Capacity: 8kg (dry weight)
• Spin Speed: 1400 RPM (adjustable)
• Energy Class: A+++
• Water Pressure: 0.5 - 8 bar
• Programmes: 14 including Cotton, Synthetic, Delicates, Wool, Quick Wash, Drum Clean
• Dimensions (HxWxD): 85cm x 60cm x 60cm (approx)
• Power Supply: 220-240V AC, 50Hz
• Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: Programme dial, Start/Pause button, Option buttons (Spin Speed, Temperature, Delay), Display.

Programme Dial: Turn to select desired wash programme. Display: Shows time remaining, selected options, error codes. Option Buttons: Adjust spin speed (400-1400 RPM, Rinse Hold), temperature (Cold to 90°C), delay start (1-24h). Special Buttons: Start/Pause, Child Lock (press 3 sec), Extra Rinse, Anti-Crease.

Settings can be adjusted before starting cycle. Press Start/Pause to begin; press again to pause.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Use only supplied hoses; do not reuse old ones. Drain: Ensure drain hose is secured in standpipe (60-100cm height) or over sink.

1. Turn off water taps before connecting hoses.
2. Check hose washers are present and not damaged.
3. Do not kink or bend hoses excessively.
4. After connection, turn on taps and check for leaks.

Tip: Ensure drain hose is not submerged in water to prevent siphoning.

Using Wash Programmes

Select programme based on fabric type and soil level.

1. Load laundry: Open door, load items loosely without overloading (max 8kg).
2. Add detergent: Pull drawer, add powder/liquid to correct compartments (I=pre-wash, II=main wash, * =softener).
3. Select programme: Turn dial (e.g., Cotton for cottons, Synthetic for synthetics).
4. Adjust options: Press Temperature, Spin Speed buttons as needed.
5. Start: Press Start/Pause. Display shows time remaining.
6. End of cycle: Signal sounds; door unlocks after a few minutes. Remove laundry promptly.

WARNING! Do not open door during high-temperature washes; wait for lock symbol to disappear.

Special Functions

Delay Start: Press Delay button to set start time (1-24h). Child Lock: Press and hold for 3 seconds to lock controls (press again to unlock). Anti-Crease: Reduces wrinkles by tumbling periodically after cycle ends (enable with button). Extra Rinse: Adds an additional rinse cycle for sensitive skin or heavy detergent use.

Care & Cleaning

Regular maintenance ensures optimal performance.

1. Clean detergent drawer: Pull out, rinse under tap, dry and replace.
2. Clean door seal: Wipe rubber gasket to remove lint and residue; leave door ajar after use.
3. Run drum clean: Monthly, use "Drum Clean" programme or 90°C cotton cycle without laundry.
4. Clean filter: Locate behind bottom panel; turn drain cap slowly to release water, then remove filter and clean.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016 and EU Ecodesign Directive. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Hotpoint is a trademark of Haier Europe Trading S.r.L.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk