Hotpoint washing machine BI WMHG 81484 EU manual

The Hotpoint BI WMHG 81484 EU is a freestanding washing machine with an 8kg capacity, energy efficiency class A+++, 1400 RPM spin speed, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, and various specialized cycles for different fabrics. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, filter, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	8 kg (dry laundry)
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Programs	15 programs including Cotton, Synthetic, Delicate, Wool, Quick Wash
Display	Digital display with time remaining, cycle stage, and options
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Load Detection	Automatically adjusts water and energy usage
Noise Level	Wash: 56 dB; Spin: 76 dB
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; ensure it does not rock.
Connect water inlet: Attach supplied hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink edge; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set preferences: Use OPTIONS button to set beep volume, default spin speed, etc.
Load laundry: Do not exceed 8 kg; distribute evenly.
Add detergent: Use dispenser drawer compartments I (pre-wash), II (main wash), * (softener).

CAUTION! Remove all transit bolts before use to prevent damage. Check hose connections for leaks.

Specifications

Model: BI WMHG 81484 EU
Capacity: 8 kg
Energy Rating: A+++
Annual Energy Consumption: 175 kWh
Water Consumption: 10,000 liters per year (approx.)
Spin Speed: 1400 RPM (adjustable)
Programs: 15 including Eco 40-60, Cotton, Synthetic, Delicate, Wool, Sport, Quick 15’
Noise: Wash 56 dB(A); Spin 76 dB(A)
Supply Voltage: 220-240 V, 50 Hz
Max Load Power: 2100 W
Dimensions: 85 cm (H) x 60 cm (W) x 60 cm (D)
Weight: 70 kg

Controls and Settings

Control Panel: POWER button, program selector knob, START/PAUSE, OPTIONS button, digital display.

Display Icons: Time remaining, child lock, delay start, spin speed, temperature, extra rinse, etc.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic, Delicate). Options: Press OPTIONS to adjust spin speed (400-1400 RPM or No Spin), temperature (cold to 90°C), and extra functions (Extra Rinse, Pre-wash). Delay Start: Set timer (1-24 hours). Child Lock: Press and hold OPTIONS and START/PAUSE for 3 seconds to enable/disable.

Connecting Water & Drain

Water Inlet: Connect hoses to cold water tap (and hot if machine supports). Use only supplied hoses. Drain: Place hose in standpipe (min. 60 cm height) or sink edge; do not submerge.

Ensure taps are off before connecting.
Attach hoses to machine first, then to taps.
Check for leaks by turning taps on slowly.
Secure drain hose to prevent slipping.

Tip: Use drain hose extension if needed; do not exceed 150 cm length.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; close door.
Add detergent: Use correct compartment; follow dosage instructions.
Select program: Turn knob (e.g., Cotton for cottons, Synthetic for synthetics).
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press START/PAUSE; display shows time remaining.
Pause: Press START/PAUSE to pause; door locks during wash.
End of cycle: Machine beeps; door unlocks after a few minutes.

WARNING! Do not open door during wash; wait until unlock symbol appears. Remove laundry promptly to prevent odors.

Special Functions

Delay Start: Set timer to start later (1-24 hours). Child Lock: Prevents accidental changes. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled items. Drum Clean: Run monthly without laundry to clean drum.

Care & Cleaning

Clean detergent drawer monthly: Pull out, rinse under water. Clean filter: Turn off machine, open filter cover at front bottom, place towel, unscrew filter cap, clean, reinstall. Wipe door seal and glass to remove lint. Run Drum Clean program monthly.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Meets EU energy efficiency and safety standards. Disposal: Follow local regulations for WEEE. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug, power outlet; ensure door is closed properly.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for kinks/blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 minutes, retry.
Detergent not dispensed	Drawer blocked	Clean detergent drawer compartments.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu