Hotpoint washing machine BI WMHG 81284 EU manual

The Hotpoint BI WMHG 81284 EU is a freestanding washing machine with a 8kg load capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1200 rpm, delay timer, child lock, and various fabric care options. Designed for standard EU household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	8 kg (dry laundry)
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1200 rpm (adjustable)
Programs	Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	Digital with time remaining, cycle stage
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Door	Reversible (opens left/right)
Noise Level	Low during wash and spin

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (and hot if model supports); use new seals.
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash.

Check installation: Ensure all bolts removed, hoses secure, machine level.
Select language: Press and hold buttons if needed (default English).
Run empty wash: Use Cotton program at 90°C without laundry to clean drum.
Set preferences: Adjust default spin speed, temperature if desired.

CAUTION! Do not use detergent for first empty wash. Ensure door is closed properly.

Specifications

Model: BI WMHG 81284 EU
Capacity: 8 kg
Dimensions (HxWxD): 85 x 60 x 55 cm
Energy Rating: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 10,000 litres per year
Spin Speed: 1200 rpm (max)
Programs: 15+ including Eco, Anti-Allergy, Sport
Noise Level (wash/spin): 56/76 dB
Power Supply: 220-240V, 50Hz
Weight: 68 kg

Controls and Settings

Access via rotary dial and button panel. Display shows time, temperature, spin speed, options.

Controls: POWER, Start/Pause, Program dial, Temperature button, Spin Speed button, Delay Start button, Option buttons (e.g., Extra Rinse, Pre-wash).

Programs: COTTON (40°C, 60°C, 90°C), SYNTHETICS (30°C, 40°C), DELICATES (30°C), WOOL, QUICK WASH (15 min), ECO 40-60, SPIN ONLY, RINSE & SPIN. Settings: Temperature selection (cold to 90°C), Spin speed selection (0 to 1200 rpm), Delay start (1-24h), Options (Pre-wash, Extra Rinse, Stain Removal).

Connecting Water & Drain

Water inlet: Cold (mandatory) and hot (optional) hoses. Drain: Hose to standpipe or sink.

Turn off water taps before connecting hoses.
Connect inlet hoses: Screw onto taps; use rubber seals; do not overtighten.
Position drain hose: Secure in standpipe (min 60 cm height) or over sink edge.
Check for leaks: Run short rinse cycle and inspect connections.

Tip: Use hose clips if provided. Ensure drain hose is not kinked.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pour into correct dispenser compartments (I=pre-wash, II=main wash, * =softener).
Select program: Turn dial to desired program (e.g., Cotton).
Adjust settings: Press Temp, Spin buttons to modify.
Add options: Press Extra Rinse, Pre-wash if needed.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to stop; wait for door lock to release.
End of cycle: Signal sounds; remove laundry promptly.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Press and hold buttons to lock controls. Anti-Allergy: Extra rinse and higher temperature to reduce allergens. Quick Wash: 15-minute cycle for lightly soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run drum cleaning program every 30 washes.

CAUTION! Do not use abrasive cleaners. Clean filter periodically to prevent blockages.

Regulatory Information

CE marked; complies with EU directives for safety, EMC, and energy labeling. Manufactured under ISO 9001. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power, door, child lock	Check plug, socket; ensure door closed; disable child lock.
No water intake	Taps, hoses, filter	Open water taps; check hose kinks; clean inlet filter.
Water does not drain	Drain hose, pump filter	Check hose height/blockage; clean pump filter.
Excessive vibration/noise	Transit bolts, leveling, load	Remove transit bolts; re-level machine; redistribute load.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu