Hotpoint washing machine BI WMHG 71484 UK manual

The Hotpoint BI WMHG 71484 is a freestanding washing machine with a 7kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programmes, delay start, child lock, and AquaStop leak protection. This manual covers safety instructions, installation, programme selection, daily use, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, filter, inlet hoses, drain hose, and adjustable feet.

Installation

Unpack and remove transit bolts. Place on a level, solid floor.

1. Position machine: Ensure at least 1cm space from walls and cabinets.
2. Adjust feet: Use a spanner to level the machine; check with spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (blue marking).
4. Connect drain hose: Place in standpipe or sink (minimum height 60cm).
5. Plug into a grounded 220-240V, 50Hz power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
2. Connect utilities: As per installation steps.
3. Run empty wash: Select "Drum Clean" or "Cotton 90°C" programme without laundry.
4. Set language: If applicable, use settings button to select English.
5. Load detergent: Fill detergent dispenser compartments as needed.

CAUTION! Never use the machine without removing transit bolts, as this can cause severe damage.

Specifications

• Model: BI WMHG 71484 UK
• Type: Freestanding front-load washing machine
• Capacity: 7kg
• Max Spin Speed: 1400 RPM
• Energy Class: A+++
• Water Pressure: 0.5 - 10 bar
• Power Supply: 220-240V, 50Hz
• Programmes: 15+ including Eco, Cotton, Synthetics, Delicates, Wool, Quick Wash
• Noise Level (wash/spin): 53/76 dB(A)
• Weight: Approx. 68kg

Controls and Settings

Control Panel: Programme selector knob, display, temperature button, spin speed button, start/pause button, option buttons (Delay, Extra Rinse, etc.).

Programme Selection: Turn knob to desired programme (e.g., Cotton, Synthetics). Use temperature and spin speed buttons to adjust. Press start/pause to begin.

Options: Delay Start (1-24h), Extra Rinse, Pre-wash, Rapid (reduces time), Child Lock (press and hold for 3 seconds).

Display Icons: Shows time remaining, selected options, door lock status, and error codes.

Connecting Utilities

Water: Connect blue hose to cold water tap. Drain: Secure drain hose in standpipe (max height 100cm). Power: Plug into grounded socket.

1. Ensure water tap is fully open.
2. Check hose for kinks.
3. Do not extend drain hose beyond 1.5m.
4. Use only original Hotpoint hoses.

Tip: Install a drip tray or leak detector for added safety, especially on wooden floors.

Using Wash Programmes

Select programme based on fabric type and soil level.

1. Sort laundry: Separate by colour and fabric type.
2. Load drum: Do not exceed 7kg; distribute evenly.
3. Add detergent: Use compartment I (pre-wash), II (main wash), * (fabric softener).
4. Select programme: Turn knob (e.g., Cotton for towels/bedding).
5. Adjust settings: Set temperature (cold to 90°C) and spin speed (400-1400 RPM).
6. Add options: Press Extra Rinse, Delay, etc. as needed.
7. Start: Press start/pause; door locks automatically.
8. End of cycle: Unlock symbol appears; wait 2 minutes before opening door.

WARNING! Do not open door during wash; hot water may cause burns. Remove items promptly to prevent mildew.

Special Functions

Delay Start: Set wash to finish at desired time. Child Lock: Disables controls (press and hold child lock button). AquaStop: Automatically shuts off water if leak detected. Drum Clean: Programme to clean drum and prevent odours (run monthly).

Care & Cleaning

Unplug before maintenance. Clean detergent dispenser monthly: remove drawer, rinse under tap. Clean filter: Turn off water, place towel below, open filter cover, drain residual water, remove debris. Wipe door seal and glass to remove lint. Run Drum Clean programme monthly.

CAUTION! Do not use abrasive cleaners or solvents. Ensure filter is tightly closed after cleaning.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations. CE marked. Waste disposal: Do not dispose with household waste; contact local authority for recycling. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or call 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk