Hotpoint washing machine BI WMHG 71483 EU N manual

The Hotpoint BI WMHG 71483 EU N is a freestanding washing machine with a 7kg capacity, A+++ energy rating, and 1400 rpm spin speed. It features multiple wash programs, electronic controls, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, door, water inlet valves, drain pump, adjustable feet.

Feature	Description
Capacity	7 kg (dry laundry)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Programs	Multiple including Cotton, Synthetics, Delicates, Quick Wash
Display	Digital with time remaining, cycle indicators
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	Protection against water leaks
Door Lock	Automatic during cycle
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink edge; secure to prevent slipping.
Level the machine: Adjust front feet using spanner; ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Connect power and water; ensure drain hose is properly positioned.
Open detergent dispenser; remove any packaging.
Run a cotton cycle at 90°C without laundry to clean drum and remove residues.
Set language if applicable via control knob/press (default may be English).
Familiarize yourself with control panel and program symbols.

CAUTION! Ensure transit bolts are removed. Do not use extension cords or adapters.

Specifications

Model: BI WMHG 71483 EU N
Type: Freestanding front-load washing machine
Capacity: 7 kg
Energy Class: A+++
Annual Energy Consumption: Approx. 150 kWh
Water Consumption: Approx. 9,000 litres per year
Spin Speed: 1400 rpm (maximum)
Noise Level (wash/spin): 53/75 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm (approx.)
Power Supply: 230-240V ~ 50Hz
Max Load: 7 kg (dry weight)

Controls and Settings

Control Panel: Program selector knob, digital display, temperature button, spin speed button, start/pause button, option buttons (e.g., delay, extra rinse).

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, Wool, Quick 30', etc.).

Temperature: Press TEMP button to cycle through available temperatures for selected program.

Spin Speed: Press SPIN button to adjust or select no spin.

Options: Buttons for Delay Start, Extra Rinse, Pre-Wash, Eco, etc. – lights indicate selection.

Start/Pause: Press to begin cycle; press again to pause (door remains locked if water is present).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if machine uses both). Use supplied hoses only.

Ensure taps are off.
Screw hoses onto taps; hand-tighten plus a quarter turn with pliers (do not overtighten).
Connect other ends to machine valves (marked).
Drain hose: Place in standpipe (min. 60 cm height, max. 100 cm) or over sink edge; use hook if supplied.
Open taps fully; check for leaks.

Tip: Run a short cycle to check connections before loading laundry.

Using Wash Programs

Select program based on fabric type and soil level.

Sort laundry by color and fabric.
Load machine: Do not exceed 7 kg; distribute evenly.
Add detergent: Pour into correct dispenser compartment (main wash, pre-wash, softener).
Select program: Turn knob (e.g., Cotton for cottons and linens).
Adjust settings: Temperature, spin speed, options as needed.
Press Start/Pause; display shows time remaining.
At end, machine beeps; door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open door during cycle if water is present (lock indicator on).

Special Functions

Delay Start: Set delay up to 24 hours; machine starts automatically. Child Lock: Press and hold specific buttons (e.g., Spin + Temp) for 3 seconds to lock controls. Anti-Crease: Tumbles intermittently after cycle if laundry not removed. Extra Rinse: Adds an additional rinse cycle. Quick Wash: For lightly soiled loads (30' or similar).

Care & Cleaning

Regular maintenance ensures performance and longevity.

Clean detergent dispenser: Remove monthly; rinse under water.
Clean door seal: Wipe rubber gasket to remove lint and residue; leave door ajar after use.
Run maintenance wash: Monthly, use a drum cleaner or run a 90°C cotton cycle without laundry.
Clean filter: Locate at front bottom; place towel, open cap, drain residual water, remove debris.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use harsh chemicals.

Regulatory Information

Complies with EU directives for safety (EN 60335), EMC, and energy labeling. Waste disposal: Do not dispose with household waste; take to designated collection point. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power, door, child lock	Check plug, socket, fuse; ensure door closed properly; disable child lock.
No water intake	Taps, hoses, filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose, pump filter	Check drain hose for blockages/kinks; clean pump filter.
Excessive vibration/noise	Transit bolts, leveling, load	Ensure transit bolts removed; re-level machine; redistribute laundry.
Error code on display	Various faults	Consult manual error code list; common codes: E01 (water issue), E02 (drain issue).
Detergent not dispensed	Dispenser blocked	Clean dispenser drawers and compartments.

Reset: Unplug for 1 minute, then restart. If error persists, contact service.

Service: Authorized Hotpoint service centers; www.hotpoint.eu/support