Hotpoint washing machine BI WDHL 7128 UK manual

The Hotpoint BI WDHL 7128 UK is a freestanding washing machine with a 7kg capacity, 1200 rpm spin speed, A+++ energy rating, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7kg laundry load
Spin Speed	Up to 1200 rpm
Energy Rating	A+++ (most efficient)
Programs	14 programs including Cotton, Synthetics, Delicates, Quick Wash
Display	Digital LED with time remaining
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Door Lock	Automatic during cycle
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove transit bolts. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marking) and machine.
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust feet using spanner; ensure no rocking.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Plug in and run a maintenance wash before first use.

Power on: Press POWER button; display lights up.
Run initial wash: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use OPTIONS button to set beep volume, end signal.
Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Ensure all packaging and transit bolts are removed before first use.

Specifications

Model: BI WDHL 7128 UK
Capacity: 7kg
Spin Speed: 1200 rpm (adjustable)
Energy Class: A+++
Water Pressure: 0.5 - 10 bar
Programs: 14 (Cotton, Eco, Synthetics, Delicates, Wool, Quick 15', etc.)
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: Wash 56 dB, Spin 76 dB
Weight: 68 kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTIONS, DELAY START, CHILD LOCK.

Display Icons: Time remaining, spin speed, temperature, delay, child lock, door locked.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.). Options: Press OPTIONS to adjust spin speed (0-1200 rpm), temperature (cold-90°C), extra rinse, pre-wash. Delay Start: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue-coded hose to cold water tap. Drain: Place hose in standpipe (min diameter 4cm) or over sink edge.

Ensure water tap is fully open.
Check hose connections for leaks.
Ensure drain hose is not kinked and is secure.
Do not extend drain hose beyond 150cm.

Tip: Use only provided hoses; do not use old hoses.

Using Wash Programs

Select program based on fabric type and soiling.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press START/PAUSE; door locks and cycle begins.
Pause: Press START/PAUSE to pause; door unlocks after 2 minutes if safe.
End: Machine beeps; door unlocks; remove laundry promptly.

WARNING! Do not open door during spin. Unbalance may cause automatic redistribution.

Special Functions

Delay Start: Set delay (1-24 hours) to start at convenient time. Child Lock: Prevents program changes during cycle. Anti-Crease: Keeps laundry tumbling after cycle to reduce wrinkles. Extra Rinse: Adds rinse for sensitive skin. Pre-Wash: For heavily soiled loads.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and drum.

Detergent drawer: Pull out, rinse under warm water.
Door seal: Wipe with damp cloth to remove lint/residue.
Drum: Run Cotton 90°C program without laundry.
Filter: Clean drain pump filter every 2-3 months (see manual).

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

Complies with UK/EU safety standards. CE marked. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 247 365.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug/power; press START/PAUSE.
No water intake	Taps closed/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain blocked/filter clogged	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts not removed/unbalanced load	Remove transit bolts; redistribute laundry; level feet.
Error codes (e.g., F01, F05)	Fault detected	Consult manual; unplug for 5 minutes; if persists, call service.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 247 365; www.hotpoint.co.uk