Hotpoint washing machine BI WDHG 861485 EU manual

The Hotpoint BI WDHG 861485 EU is a freestanding washing machine with a large capacity, multiple wash programs, energy-efficient operation, and user-friendly controls. It features electronic controls, a digital display, delay start, child lock, and various safety mechanisms. Designed for standard European household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Digital display, Detergent dispenser, Drum, Door with safety lock, Adjustable feet, Water inlet hoses, Drain hose.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure adequate space for ventilation and door opening.
2. Connect water supply: Attach inlet hoses to hot and/or cold taps (check supplied washers).
3. Connect drain hose: Place in standpipe or sink (ensure no kinks).
4. Level the machine: Adjust feet using a spanner; use a spirit level.
5. Plug into a grounded power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

1. Ensure water and power are connected.
2. Open detergent dispenser, fill with a small amount of detergent (or use a dedicated drum cleaner).
3. Select the "Cotton" program at the highest temperature (e.g., 90°C).
4. Press Start. Let the cycle complete.
5. After cycle, the machine is ready for normal use.

CAUTION! The first cycle may produce steam and smell; this is normal. Ensure room is ventilated.

Specifications

• Model: BI WDHG 861485 EU
• Type: Freestanding Front-Load Washing Machine
• Capacity: 8 kg (dry cotton)
• Energy Rating: A+++ (on EU scale)
• Spin Speed: Up to 1400 rpm
• Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, etc.
• Water Pressure: 0.5 - 8 bar
• Power Supply: 220-240V, 50Hz
• Dimensions (HxWxD): Approx. 85 x 60 x 60 cm
• Noise Level: Wash: 53 dB, Spin: 73 dB

Controls and Settings

Control Panel: Rotary program selector, Start/Pause button, Temperature button, Spin speed button, Option buttons (Delay, Extra Rinse, etc.), Digital display.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic). Temperature: Press Temp button to cycle through available temperatures for selected program. Spin Speed: Press Spin button to adjust or select No Spin. Options: Use dedicated buttons for Delay Start, Pre-wash, Extra Rinse, etc. Start/Pause: Press to begin cycle; press again to pause. Child Lock: Press and hold specific buttons (as per manual) to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (red for hot, blue for cold if using both). Use only supplied hoses. Drain: Ensure drain hose is secured in standpipe (max height 100 cm) or over sink edge.

1. Turn off taps before connecting hoses.
2. Screw hoses onto taps by hand, then tighten a quarter turn with pliers. Do not overtighten.
3. Ensure drain hose is not pushed too far into standpipe (risk of siphoning).
4. After connections, turn on taps and check for leaks.

Tip: Use hose clips if supplied. Periodically check hoses for wear.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not overload. Close door firmly.
2. Add detergent: Open dispenser drawer, add detergent and softener to correct compartments.
3. Select program: Turn knob (e.g., Cotton for towels/bed linen).
4. Adjust settings: Set temperature, spin speed, and any options.
5. Start: Press Start/Pause. The door locks and cycle begins.
6. End of cycle: A signal may sound. Door remains locked until drum is safe to open (light goes out).
7. Remove laundry promptly to avoid creasing.

WARNING! Do not open door during wash or spin. Wait for door lock light to go off.

Special Functions

Delay Start: Set delay (1-24 hrs) to start cycle later. Child Lock: Locks control panel. Extra Rinse: Adds an additional rinse cycle. Pre-wash: For heavily soiled items. Rapid Programs: For smaller, lightly soiled loads (e.g., 30°C Quick Wash).

Care & Cleaning

Regular maintenance ensures performance and longevity.

1. Clean detergent dispenser: Pull out drawer, rinse under tap, dry, and reinsert.
2. Clean door seal: Wipe rubber gasket to remove lint and residue; leave door ajar after use to dry.
3. Clean drain pump filter: Locate behind lower access panel; place towel, unscrew filter cap, drain residual water, clean filter, reinsert securely.
4. Run maintenance wash: Monthly, run a hot cotton cycle (90°C) without laundry but with detergent or cleaner.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

This appliance complies with EU Directives: Low Voltage Directive, EMC Directive, Ecodesign Directive, and Energy Labelling Regulation. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact the service number provided in your country.

Troubleshooting

Reset: Unplug from mains for 2 minutes, then reconnect.

Service: Contact authorized Hotpoint service. Have model and serial numbers ready.