Hotpoint washing machine BI WDHG 861484 UK manual

The Hotpoint BI WDHG 861484 is a freestanding washing machine with a 8kg capacity, 1400 rpm spin speed, and energy rating A+++. It features multiple wash programmes including Cotton, Synthetics, Delicates, Wool, Quick Wash, and Steam Refresh. Equipped with a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8kg drum capacity, Digital display, Programme selector knob, Detergent dispenser, Door with safety lock, Adjustable feet, Water inlet hoses, Drain hose.

FeatureDescription
Capacity8kg (dry laundry weight)
Spin SpeedUp to 1400 rpm
Energy RatingA+++ (most efficient)
DisplayDigital with time remaining, cycle indicators
Programmes15 programmes including Cotton, Eco, Quick 30'
Delay StartUp to 24 hours
Child LockPrevents accidental programme changes
Anti-FloodAquaStop™ protection system
Door LockSafety lock during operation
Adjustable FeetFor levelling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (blue markings) and machine.
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust feet using spanner; check with spirit level.
  5. Plug into 220-240V AC power socket.

WARNING! Do not install in areas below 0°C. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press POWER button.
  2. Run empty wash: Select "Drum Clean" programme at 90°C without detergent.
  3. Set preferences: Use SETTINGS button to set time, volume, etc.
  4. Load detergent: Fill compartments I (pre-wash), II (main wash), * (softener).
  5. Select programme: Turn knob to desired programme.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Controls and Settings

Control Panel: POWER button, Programme selector knob, START/PAUSE, OPTIONS buttons, Digital display.

Display Icons: Time remaining, Child lock, Delay start, Spin speed, Temperature, Extra rinse.

Programmes: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (30°C), Wool (hand wash cycle), Quick 30' (30 minutes), Eco 40-60, Drum Clean. Options: Delay start (1-24h), Extra rinse, Reduced creases, Speed wash. Settings: Volume, time format, child lock default.

Connecting Water & Drain

Water Inlet: Cold fill only (blue hose). Drain: Hose to standpipe or sink.

  1. Turn off water tap before connecting hoses.
  2. Connect inlet hose to machine (right side) and tap; hand-tighten plus quarter turn.
  3. Place drain hose in standpipe (max 100cm high) or over sink edge.
  4. Ensure no kinks in hoses.

Tip: Use only supplied hoses; replace every 5 years.

Using Wash Programmes

Supports various fabrics and soil levels.

  1. Load laundry: Do not overload; distribute evenly.
  2. Add detergent: Use compartments I, II, * as needed.
  3. Select programme: Turn knob (e.g., Cotton for towels/bedding).
  4. Set options: Press OPTIONS for extra rinse, spin speed, etc.
  5. Start: Press START/PAUSE; door locks automatically.
  6. After wash: Remove laundry promptly; leave door ajar to dry.
  7. Delay start: Set delay (1-24h) before pressing START.

WARNING! Do not open door during wash; wait for unlock symbol. Check pockets for objects.

Special Functions

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Anti-Flood: AquaStop™ detects leaks and stops water. Delay Start: Programme starts later (energy saving). Drum Clean: Run monthly with detergent to prevent odours.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass; remove debris. Run Drum Clean programme monthly.

CAUTION! Do not use abrasive cleaners or solvents. Keep ventilation openings clear.

Regulatory Information

EU Ecodesign and Energy Label regulations compliant. UKCA marked. Manufactured by Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 0333 305 2264. Serial number located on door rim or rear panel.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug and power; press START.
No water intakeTaps off/hose kinkedOpen taps; check hose for kinks; clean filter.
Water leaksLoose connectionsTighten hoses; check door seal for debris.
Excessive vibrationTransit bolts/levellingEnsure transit bolts removed; re-level feet; redistribute load.
Poor wash resultsOverload/detergentReduce load; use correct detergent amount; clean dispenser.
Display shows error codeFault detectedConsult manual for code meaning; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 2264; www.hotpoint.co.uk

Hotpoint washing machine BI WDHG 861484 UK manual © - All Rights Reserved 2025