Hotpoint washing machine BI WDHG 861484 EU manual

The Hotpoint BI WDHG 861484 EU is a freestanding washing machine with a 6kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 rpm, delay timer, child lock, and various fabric-specific cycles. Designed for 230V~50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	6 kg maximum dry load
Spin Speed	Up to 1200 rpm (adjustable)
Energy Class	A (energy efficient)
Programs	Cotton, Synthetic, Delicate, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Display	Digital display showing time, cycle, and status
Door Lock	Automatic safety lock during operation
Water Inlet	Hot & cold water connections
Drain Hose	Adjustable height for proper drainage

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Level the machine by turning adjustable feet; ensure it does not rock.
Connect water supply: Attach inlet hoses to hot and/or cold taps (check filters are clean).
Connect drain hose: Place hose into standpipe or sink (minimum height 60 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a cotton cycle at 90°C without laundry to clean the drum.

Power on: Press POWER button; display will light up.
Select language: Press SETTINGS button to choose display language.
Test water connections: Run a quick rinse cycle to check for leaks.
Load detergent: Fill compartments as per detergent manufacturer instructions.
Select program: Turn program selector to desired cycle.
Start: Press START/PAUSE button.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: BI WDHG 861484 EU
Capacity: 6 kg
Dimensions (HxWxD): 85 x 60 x 55 cm
Spin Speed: 1200 rpm (variable)
Energy Rating: A
Water Pressure: 0.5 - 10 bar
Power Supply: 230V~, 50Hz, 10A
Programs: 15 programs including Cotton Eco, Synthetics, Delicates, Quick 30', Wool, Hand Wash, Spin, Rinse
Noise Level: Washing: 59 dB; Spinning: 77 dB
Weight: 68 kg

Controls and Settings

Control Panel: POWER button, Program selector knob, Temperature button, Spin speed button, Delay Start button, Options buttons (Extra Rinse, Prewash, etc.), START/PAUSE button, Child Lock button.

Display Symbols: Door locked, Child lock active, Delay time, Remaining time, Temperature, Spin speed, Option indicators.

Program Selection: Turn knob to desired program (e.g., Cotton 60°). Temperature: Press TEMP button to cycle through available temperatures (Cold to 90°C). Spin Speed: Press SPIN button to select speed (Rinse Hold to 1200 rpm). Options: Select Extra Rinse, Prewash, etc. as needed. Delay Start: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to hot and/or cold taps using supplied fittings. Drain: Place hose securely into drain standpipe (max height 100 cm) or over sink edge.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Check inlet filters are clean and not blocked.
Secure drain hose to prevent slipping during spin.

Tip: For cold fill only, connect both hoses to cold tap using a Y-connector (not supplied).

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load items loosely without overloading.
Add detergent: Pour into main wash compartment (II). For prewash, add to compartment (I). Fabric softener to compartment (*).
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust settings: Set temperature, spin speed, and options as needed.
Delay start (optional): Press DELAY to set start time.
Start: Press START/PAUSE; door locks and cycle begins.
End of cycle: Display shows "End"; door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open door during wash or spin; wait for door lock symbol to disappear.

Safety Features

Child Lock: Locks control panel to prevent changes. Door Lock: Automatically locks during operation; unlocks at end of cycle or when machine is safe to open. Overflow Protection: Automatically stops water intake if detected. Imbalance Control: Reduces spin speed if load is unbalanced.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean detergent dispenser: Remove monthly and rinse under water.
Clean door seal: Wipe rubber gasket to remove lint and residue.
Clean drain pump filter: Turn off and unplug machine; open filter cover at front bottom; place towel to catch water; unscrew filter, clean, and reinsert.
Run maintenance cycle: Monthly, run a 90°C cotton cycle without laundry to clean drum.

CAUTION! Unplug before cleaning any parts. Do not use abrasive cleaners.

Regulatory Information

CE Marking: Complies with European Directives. WEEE Directive: Do not dispose with household waste; recycle appropriately. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power, door, child lock	Check plug, socket, and power; ensure door closed properly; check child lock is off.
No water intake	Taps, hoses, filters	Ensure taps are on; check hoses for kinks; clean inlet filters.
Water does not drain	Drain hose, pump filter	Check hose for kinks/blockages; clean pump filter.
Excessive vibration/noise	Transit bolts, leveling, load	Ensure transit bolts removed; level machine; redistribute unbalanced load.
Error codes on display	Various faults	Refer to error code list in manual; common codes: F01 (door issue), F02 (drain problem), F07 (motor fault).
Leaking water	Hoses, detergent, overfill	Tighten hose connections; ensure detergent dispenser is not overfilled; check door seal.

Reset: Unplug for 1 minute, then restart. For persistent errors, contact service.

Service: Contact authorized Hotpoint service center. Keep model number ready.