Hotpoint washing machine BHWMD 742 (UK) manual

The Hotpoint BHWMD 742 is a 7kg capacity freestanding washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programmes including Eco 40-60, Cotton, Synthetic, Delicates, Wool, and Quick Wash. It features a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, digital control panel, detergent dispenser, filter, adjustable feet, water inlet hoses, drain hose.

Feature	Description
Capacity	7kg (dry laundry weight)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Digital Display	Shows time remaining, programme, and settings
Delay Start	Set start time up to 24 hours in advance
Child Lock	Prevents accidental changes during operation
Anti-Flood Protection	AquaStop™ technology for leak prevention
Detergent Dispenser	Compartments for pre-wash, main wash, and softener
Quick Wash	30-minute programme for lightly soiled items
Eco 40-60	Energy-efficient programme for mixed loads at 40°C or 60°C

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if required (red marker).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into 230V AC power socket.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash.

Add detergent: Pour 100ml of detergent into main wash compartment.
Select programme: Turn dial to "Cotton 60°C".
Start: Press Start/Pause button; machine will fill and run for full cycle.
Set preferences: Use Settings button to adjust buzzer volume, display brightness.

CAUTION! Remove all packaging materials and transit bolts before first use.

Specifications

Model: BHWMD 742
Capacity: 7kg
Energy Rating: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5 - 8 bar
Programmes: Eco 40-60, Cotton, Synthetic, Delicates, Wool, Quick Wash, Rinse & Spin, Drain
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 230V AC, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)

Controls and Settings

Control Panel: Programme dial, digital display, Start/Pause, Delay Start, Child Lock, Settings button.

Programme Dial: Select from Eco 40-60, Cotton (20°C-90°C), Synthetic, Delicates, Wool, Quick Wash (30 min), Rinse & Spin, Drain.

Settings: Press Settings button to adjust - Buzzer (On/Off), Display brightness, End of cycle signal. Delay Start: Press Delay button, use +/- to set hours (1-24). Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100cm).

Turn off water taps before connecting hoses.
Ensure rubber seals are in place on hose connectors.
Secure drain hose with hook to prevent slipping.
Check for leaks after first run.

Tip: Use only supplied hoses; do not overtighten connections.

Using Wash Programmes

Supports various fabrics and soil levels.

Load laundry: Open door, load items loosely; do not overload.
Add detergent: Use dispenser compartments (I=pre-wash, II=main wash, * =softener).
Select programme: Turn dial to desired programme (e.g., Cotton for towels/bedding).
Adjust options: Press Temperature or Spin buttons to modify if needed.
Start: Press Start/Pause; display shows time remaining.
Pause/Add: Press Start/Pause to stop; door locks during wash, unlocks when safe.
Complete: Buzzer sounds; remove laundry promptly to avoid creasing.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Features

Delay Start: Set wash to begin later (e.g., at night). Child Lock: Prevents children changing settings. Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and filter.

Detergent dispenser: Remove drawer, rinse under warm water.
Door seal: Wipe with damp cloth to remove lint/debris.
Filter: Turn off machine, open filter cover at front bottom, place bowl, unscrew filter slowly, clean under tap.
Run drum clean: Use "Drum Clean" programme or Cotton 90°C without laundry.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

UKCA/CE marked; complies with UK safety and EMC regulations. Manufactured for Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Energy label according to EU Regulation 2019/2014.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door fully closed; check plug socket is on; press Start/Pause.
No water entering	Taps off/hose kinked	Open water taps; straighten hoses; check for blockages.
Water not draining	Drain hose/filter blocked	Check hose is not too low; clean filter; remove blockages.
Excessive vibration	Transit bolts/uneven load	Ensure transit bolts removed; redistribute laundry; level feet.
Error codes (e.g., F01)	Fault detected	Consult manual; common codes: F01=door fault, F05=drain issue.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk