Hotpoint Washing Machine BHWD129 Manual

The Hotpoint BHWD129 is a 12kg capacity top-loading washing machine with 8 wash programs, digital display, delay start, child lock, quick wash cycle, and energy-efficient operation. It features a stainless steel drum, adjustable feet for leveling, and a transparent lid with safety lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, stainless steel drum, transparent lid, adjustable feet, inlet hoses, drain hose.

Feature	Description
Capacity	12kg (dry laundry weight)
Wash Programs	8 programs including Cotton, Synthetic, Quick Wash, Delicate, etc.
Digital Display	Shows cycle time, delay start, and program status
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Quick Wash	30-minute cycle for lightly soiled items
Adjustable Feet	Four adjustable feet for stable leveling
Safety Lid Lock	Automatically locks during operation
Energy Rating	A++ energy efficiency class
Spin Speed	Up to 1200 RPM

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water inlet: Attach inlet hoses to hot/cold taps (if applicable) and machine inlet valves.
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on machine: Press POWER button.
Select maintenance cycle: Choose Cotton program at 90°C without laundry.
Add detergent: Pour 100ml of detergent into drum.
Start cycle: Press START/PAUSE to begin; let complete.
Set preferences: Use PROGRAM knob and OPTIONS buttons to adjust default settings.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: Hotpoint BHWD129
Capacity: 12kg
Energy Class: A++
Water Consumption: Approx. 52 liters per cycle (cotton program)
Spin Speed: 1200 RPM max
Programs: 8 (Cotton, Synthetic, Quick Wash, Delicate, Wool, Sport, Rinse+Spin, Drain)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz, 10A
Noise Level: 58 dB (washing), 78 dB (spinning)

Controls and Settings

Control Panel: POWER button, PROGRAM knob, START/PAUSE, OPTIONS buttons (Delay Start, Child Lock, Extra Rinse), digital display.

Program Selection: Turn PROGRAM knob to desired wash cycle.

Options: Press OPTIONS to select Delay Start (1-24h), Child Lock (hold 3 sec), Extra Rinse.

Display: Shows remaining time, selected program, and active options.

Adjustments: Spin speed and temperature can be adjusted for some programs by pressing corresponding buttons.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual inlet). Drain: Place hose in standpipe (max height 100cm).

Turn off taps before connecting hoses.
Ensure hose filters are clean and seals are tight.
Drain hose must not be kinked or submerged.
After connections, turn on taps and check for leaks.

Tip: Use hose clips if provided for secure connections.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open lid, load items evenly, do not overload.
Add detergent: Pour into detergent drawer (main wash and pre-wash compartments if needed).
Select program: Turn PROGRAM knob (e.g., Cotton for cottons, Synthetic for synthetics).
Set options: Press OPTIONS for Extra Rinse, Delay Start, etc.
Start: Press START/PAUSE; lid locks automatically.
Pause/Stop: Press START/PAUSE to pause; turn PROGRAM knob to OFF to cancel.
End of cycle: Machine beeps; lid unlocks after a short delay.

WARNING! Do not open lid during spin cycle. Balance load to prevent excessive vibration.

Safety Features

Child Lock: Press and hold Child Lock button for 3 seconds to lock controls. Lid Lock: Automatically engages during wash and spin. Overflow Protection: Automatically stops water inlet if detected. Unbalanced Load Detection: Reduces spin speed or stops if load is unbalanced.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run maintenance wash every 30 cycles.

CAUTION! Do not use abrasive cleaners or solvents. Clean filter periodically to prevent blockages.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/lid	Check power plug; ensure lid is closed properly; press POWER.
No water inlet	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes on display	Various faults	Refer to error code list in manual; reset by turning off/on.

Reset: Turn PROGRAM knob to OFF, then back to desired program.

Service: +44 (0) 344 822 4224; www.hotpoint.eu