Hotpoint washing machine BHWD 129 (UK)/1 manual

The Hotpoint BHWD 129 (UK)/1 is a freestanding washing machine with a 9kg load capacity, featuring multiple wash programmes, energy-efficient operation, a digital display, delay start, child lock, and fast wash options. Designed for UK household use with a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum door, water inlet hoses, drain hose, adjustable feet, and power cord.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure at least 1cm clearance from walls and cabinets.
2. Adjust feet: Use a spanner to level the machine; check with spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure seals are tight.
4. Connect drain hose: Place hose into standpipe or sink, secure with provided hook.
5. Plug into grounded power socket.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are secure to prevent leaks.

First-Time Setup

After installation, run an empty maintenance wash.

1. Power on: Plug in and press the power button.
2. Select maintenance cycle: Turn dial to "Drum Clean" or "Cotton 90°C" without detergent.
3. Start cycle: Press start/pause. This removes any residues from manufacturing.
4. Set preferences: Use settings button to adjust default spin speed, temperature if desired.
5. Load laundry: Sort fabrics and check care labels.

CAUTION! Ensure transit bolts are fully removed before first use to prevent damage.

Specifications

• Model: BHWD 129 (UK)/1
• Capacity: 9kg
• Dimensions (HxWxD): 85cm x 60cm x 60cm (approx)
• Power Supply: 220-240V AC, 50Hz
• Max Spin Speed: 1400 rpm
• Water Pressure: 0.5 - 10 bar (required)
• Programmes: Cotton, Synthetic, Delicates, Wool, Quick Wash, Drum Clean, etc.
• Energy Class: A+++ (or as per model rating)
• Noise Level: Wash: 53 dB, Spin: 74 dB (approx)
• Weight: 70kg (approx)

Controls and Settings

Control Panel: Power button, Programme dial, Display, Start/Pause, Delay Start, Child Lock, Spin Speed, Temperature.

Programme Dial: Select from: Cotton (various temps), Synthetic, Delicates, Wool, Hand Wash, Quick Wash (30°C), Drum Clean, Spin Only, Rinse & Spin.

Settings: Use +/- buttons to adjust spin speed (Off to 1400 rpm) and temperature (Cold to 90°C). Delay Start: Press to set start time in hours. Child Lock: Press and hold for 3 seconds to activate/deactivate (controls locked). Display: Shows time remaining, cycle stage, and selected options.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (if available) taps. Use only supplied hoses. Drain: Hose can be placed in standpipe (min 60cm height) or over sink edge.

1. Ensure taps are off before connecting hoses.
2. Attach hoses to machine first, then to taps. Hand-tighten only.
3. Place drain hose securely; avoid kinks.
4. After connections, turn on taps fully and check for leaks.

Tip: Run a short rinse cycle to check for leaks before first full wash.

Using Wash Programmes

Follow fabric care labels. Sort by colour and soil level.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Use drawer compartments II (pre-wash), I (main wash), * (softener).
3. Select programme: Turn dial to desired programme (e.g., Cotton 40°C).
4. Adjust settings: Change temperature/spin if needed.
5. Start: Press Start/Pause. Door locks and cycle begins.
6. At end: "End" appears. Wait for door unlock signal (approx 2 mins). Remove laundry promptly.

WARNING! Do not open door during cycle. Wait for drum to stop and door lock to release.

Special Functions

Delay Start: Set start time (1-24 hrs). Child Lock: Locks controls (press & hold 3 sec). Extra Rinse: Adds an additional rinse cycle. Half Load: Reduces water for smaller loads. Rapid Wash: Shorter cycle for lightly soiled items.

Care & Cleaning

Regular maintenance ensures performance and longevity.

1. Clean detergent drawer: Remove monthly, rinse under tap.
2. Clean door seal: Wipe rubber gasket to remove lint/debris.
3. Run Drum Clean: Use monthly with dedicated cleaner or 90°C cotton cycle without laundry.
4. Exterior: Wipe with damp cloth; do not use abrasive cleaners.
5. Filter cleaning: Locate drain pump filter at bottom front; place towel, open cap, drain water, remove debris.

CAUTION! Unplug machine before cleaning filter. Do not use steam cleaners.

Regulatory Information

Complies with UK safety standards and EU directives for electrical equipment. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. Hotpoint is a trademark of Haier Europe Trading S.r.L. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk