The Hotpoint AWM 1081 EU is a freestanding 8 kg washing machine with a 1400 RPM spin speed, featuring multiple wash programs, energy efficiency class A+++, AquaStop leak protection, a delay timer, and a digital display. It is designed for standard European household use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Control panel with digital display, detergent dispenser, drum, water inlet hoses, drain hose, adjustable feet, and power cord.
| Feature | Description |
|---|---|
| Capacity | 8 kg (dry laundry) |
| Spin Speed | Up to 1400 RPM |
| Energy Class | A+++ (most efficient) |
| Programs | Cotton, Synthetics, Delicates, Quick Wash, Wool, etc. |
| AquaStop | Leak protection system |
| Delay Timer | Up to 24 hours |
| Digital Display | Shows time, cycle stage, and settings |
| Door Lock | Automatic safety lock during operation |
| Adjustable Feet | For leveling the machine |
| Detergent Dispenser | Compartments for pre-wash, main wash, and softener |
Unpack and remove all transit bolts and packaging. Place on a solid, level floor.
WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed to prevent damage.
Before first use, run a maintenance wash.
CAUTION! Ensure all packaging and transit bolts are removed before first use.
Control Panel: POWER button, Program selector dial, Temperature button, Spin speed button, Delay timer button, Option buttons (e.g., Pre-wash, Extra Rinse), START/PAUSE button, and Digital display.
Program Selection: Turn dial to desired program (Cotton, Synthetics, Delicates, Wool, etc.). Temperature: Press to select from cold to 90°C. Spin Speed: Press to select from Rinse Hold to 1400 RPM. Delay Timer: Press to set start delay (1-24 hours). Options: Select extra functions like Pre-wash or Extra Rinse. Display: Shows remaining time, selected options, and error codes.
Water Inlet: Connect blue-marked hose to cold water tap. Drain: Place hose in standpipe (max height 100 cm) or over sink edge.
Tip: Use AquaStop hose (if included) for enhanced leak protection.
Supports various fabrics and soil levels.
WARNING! Do not open door during wash or spin; wait for unlock indicator.
Regular cleaning ensures performance and longevity.
CAUTION! Unplug before cleaning. Do not use steam or high-pressure cleaners.
Child Lock: Press and hold DELAY TIMER and SPIN SPEED buttons for 3 seconds to lock controls. Door Lock: Automatic during operation; remains locked until safe. Button Lock: Prevents accidental program changes.
CE Marking: Complies with European Directives for safety and electromagnetic compatibility. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine does not start | Power, door, child lock | Check plug/power; ensure door closed; disable child lock. |
| No water intake | Taps, hoses, filter | Open water taps; check hose for kinks; clean inlet filter. |
| Water does not drain | Drain hose, pump filter | Check hose height/blockage; clean pump filter. |
| Excessive vibration/noise | Transit bolts, leveling, load | Ensure transit bolts removed; re-level machine; redistribute load. |
| Error codes on display | Various faults | Consult manual error code list; unplug for 5 minutes, retry. |
| Detergent not dispensed | Dispenser blocked | Remove and clean dispenser compartments. |
Reset: Unplug for 5 minutes, then restart.
Service: Contact authorized Hotpoint service center. Visit www.hotpoint.eu for help.