Hotpoint washing machine ARTXD 149 manual

The Hotpoint ARTXD 149 is a freestanding washing machine with a 9kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 rpm, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9kg load capacity for large laundry loads
Spin Speed	Up to 1400 rpm for efficient drying
Energy Rating	A+++ for high energy efficiency
Programs	Multiple wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Automatic water shut-off in case of leaks
Display	Digital display showing time remaining and program status
Door Lock	Automatic door lock during operation
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use spanner to remove all four bolts from rear.
Connect water supply: Attach inlet hoses to hot and cold water taps (if applicable).
Connect drain hose: Place hose into standpipe or sink, secure with hook.
Level the machine: Adjust feet using wrench to ensure machine is stable.
Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial setup cycle.

Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set language: Press and hold Settings button for 3 seconds to select language.
Adjust default settings: Use control dial to set preferred spin speed, temperature.
Test programs: Run short cycle to ensure proper operation.

CAUTION! Ensure machine is level to prevent excessive vibration during spin.

Specifications

Model: ARTXD 149
Capacity: 9kg
Spin Speed: 1400 rpm (adjustable)
Energy Class: A+++
Water Consumption: Approx. 50 liters per cycle (Cotton 60°C)
Programs: 15 programs including Eco, Wool, Sport, Anti-Allergy
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V AC, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)
Weight: 70kg

Controls and Settings

Access settings via control dial and digital buttons. Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR, OPTION buttons, DELAY START, CHILD LOCK.

Display Indicators: Time remaining, program stage, temperature, spin speed, delay time, child lock icon.

Program Selection: Turn dial to select (Cotton, Synthetics, Delicates, Quick 30', Wool, Silk, Sport, Jeans, Mix, Eco 40-60, Drum Clean, Rinse+Spin, Spin Only). Options: Extra Rinse, Pre-Wash, Speed Wash, Anti-Crease. Settings: Default temperature (30°C-90°C), spin speed (0-1400 rpm), delay (1-24h).

Connecting Water Supply

Cold water connection standard; hot water optional for specific programs.

Turn off water taps before connecting hoses.
Connect blue-marked hose to cold water tap, red-marked to hot (if used).
Ensure filters are clean and connections are hand-tight plus quarter turn.
Check for leaks by turning on taps briefly before starting wash.

Tip: Use only supplied hoses; replace if damaged. Do not overtighten.

Using Wash Programs

Supports various fabric types and soil levels.

Sort laundry: Separate by color, fabric type, and soil level.
Load machine: Do not exceed 9kg; distribute evenly in drum.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn dial to desired program.
Adjust options: Press OPTION buttons for Extra Rinse, Pre-Wash, etc.
Set temperature/spin: Use +/- buttons to adjust.
Start: Press START/PAUSE; door locks automatically.
After cycle: Wait for door lock symbol to disappear before opening.

WARNING! Do not open door during wash or spin cycle. Unbalanced load may cause machine to stop.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Door Lock: Automatic during operation. Anti-Flood: Shuts off water if leak detected. Overheating Protection: Thermal cut-off prevents motor damage.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Drum Clean program every 30 cycles. Check and clean drain pump filter quarterly.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at 0800 316 1444 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in socket; ensure door is properly closed.
No water intake	Taps/hoses	Ensure water taps are on; check hoses for kinks; clean inlet filters.
Excessive vibration	Transit bolts/leveling	Verify transit bolts removed; adjust feet for level; redistribute load.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter; ensure height is 60-100cm.
Error codes on display	Various faults	Refer to manual error code list (e.g., F01: water inlet fault, F05: drain issue).
Detergent not dissolving	Dispenser clogged	Clean dispenser drawers with warm water; use correct detergent type.

Reset: Unplug for 1 minute to reset electronic control.

Service: 0800 316 1444; www.hotpoint.eu