Hotpoint washing machine Aqualtis manual

The Hotpoint Aqualtis is a high-efficiency front-loading washing machine featuring multiple wash programs, energy-saving technologies, a large capacity drum, digital display, delay start, child lock, and various fabric care options. Designed for household use with standard 120V AC power. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Digital Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Adjustable Feet, Door Lock.

Feature	Description
Digital Display	Shows program time, settings, and error codes
Program Selector	Rotary knob for choosing wash cycles
Start/Pause Button	Initiates or pauses the wash cycle
Temperature Selector	Adjusts water temperature for each program
Spin Speed Selector	Controls final spin speed (RPM)
Delay Start	Delays cycle start up to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Detergent Dispenser	Compartments for pre-wash, main wash, and fabric softener
Door Lock	Automatic lock during operation for safety
Adjustable Feet	For leveling the machine on uneven floors

Installation

Unpack and inspect contents. Place on a solid, level floor near water and drain connections.

Remove transit bolts: Use wrench to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold water taps (check for leaks).
Connect drain hose: Place hose into standpipe or sink (minimum height 60cm).
Level the machine: Adjust feet using a wrench; use spirit level to check.
Plug into grounded electrical outlet.

WARNING! Machine is heavy; use two people for moving. Ensure transit bolts are removed before operation.

First-Time Setup

Power on the machine; run an initial empty wash cycle.

Open water taps fully.
Add detergent: Pour 1/2 cup of liquid detergent into drum or dispenser.
Select program: Turn knob to "Cotton" at 90°C.
Start cycle: Press Start/Pause to begin; this cleans the drum and removes residues.
Set preferences: After cycle, adjust default settings via control panel if needed.

CAUTION! Do not load laundry during first wash. Ensure door is properly closed.

Specifications

Capacity: 8 kg (17.6 lbs) dry laundry.
Energy Rating: A+++ (most efficient).
Spin Speed: Up to 1400 RPM.
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Eco, Sport, etc.
Water Consumption: Approx. 45 liters per cycle (average).
Power Supply: 120V AC, 60Hz, 10A.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Noise Level: ≤ 65 dB during spin.

Controls and Settings

Access settings via rotary knob and button panel. Display shows time, temperature, and options.

Control Panel: Program Knob, Start/Pause, Temperature (+/-), Spin Speed (+/-), Delay Start, Child Lock, Option Buttons (Extra Rinse, Pre-wash, etc.).

Program Selection: Turn knob to desired program (icon and name shown). Temperature: Adjust in 10°C steps (cold to 90°C). Spin Speed: Adjust from No Spin to 1400 RPM. Options: Select additional functions (e.g., Easy Iron, Intensive). Delay Start: Set delay (1-24 hours). Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Two hoses (blue for cold, red for hot). Drain: Flexible hose with U-shaped hook.

Ensure water taps are off before connecting hoses.
Connect hoses to machine inlet valves (tighten by hand, then 1/4 turn with pliers).
Connect other ends to water taps (use washers provided).
Place drain hose into standpipe (max insertion 15cm) or over sink edge.
Secure hose to prevent slipping.

Tip: Check all connections for leaks before first use. Do not kink hoses.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, place items loosely in drum (do not overload).
Add detergent: Use dispenser drawer (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust settings: Set temperature, spin speed, and options as needed.
Start: Press Start/Pause; door locks and cycle begins.
Pause/Stop: Press Start/Pause to pause; turn knob to reset to stop.
End of cycle: Signal sounds; door unlocks after a short delay.
Remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash/spin; wait for unlock signal. Keep small items out of drum seal.

Special Functions

Delay Start: Set via button; display shows hours until start. Child Lock: Locks controls (hold button 3 sec). Option Buttons: Extra Rinse (adds rinse cycle), Pre-wash (for heavy soil), Easy Iron (reduces wrinkles), Intensive (longer wash for stains).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum cleaning cycle every 30 washes.

CAUTION! Do not use abrasive cleaners or solvents. Clean drain pump filter periodically if instructed.

Regulatory Information

Complies with IEC/EN standards for safety and energy efficiency. Manufactured under ISO 9001. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.com or contact 1-800-447-2882.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug/power; ensure door is closed properly; press Start.
No water intake	Taps/hoses	Open water taps; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose for blockages; clean drain pump filter.
Excessive vibration/noise	Leveling/load	Re-level machine; redistribute laundry; ensure transit bolts removed.
Error code on display	Various faults	Refer to manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-447-2882; www.hotpoint.com