The Hotpoint Aqualtis AQS73D 29 is a 7kg capacity front-loading washing machine with an A+++ energy rating, featuring AquaCare technology for gentle fabric care, Direct Spray for efficient rinsing, a 1400 RPM spin speed, multiple wash programs including Anti-Allergy and Quick Wash, delay timer, child lock, and self-cleaning detergent drawer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Front-loading drum with AquaCare technology, Control Panel, Detergent Drawer, Water Inlet Hoses, Drain Hose, Adjustable Feet.
| Feature | Description |
|---|---|
| AquaCare Technology | Gentle washing action to protect fabrics |
| Direct Spray System | Efficient rinsing with reduced water consumption |
| 7kg Capacity | Suitable for medium to large households |
| 1400 RPM Spin Speed | High-speed spin for reduced drying time |
| A+++ Energy Rating | High energy efficiency |
| Multiple Wash Programs | Including Cotton, Synthetic, Delicate, Anti-Allergy, Quick Wash |
| Delay Timer | Up to 24 hours delay start |
| Child Lock | Prevents accidental program changes |
| Self-Cleaning Detergent Drawer | Easy maintenance |
| Display with Indicators | Shows time remaining, program stage, and alerts |
Unpack and inspect contents. Place on a stable, level floor.
WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.
Before first use, run a maintenance wash.
CAUTION! Ensure transit bolts are removed before operation to prevent damage.
Access programs and options via rotary dial and button panel.
Control Panel: POWER button, Rotary Program Selector, OPTIONS buttons (Temperature, Spin Speed, Delay Start, Extra Rinse), START/PAUSE button, Display.
Program Selection: Turn dial to desired program (e.g., Cotton, Synthetic). Options: Adjust temperature (Cold to 90°C), spin speed (RPM or No Spin), delay start (1-24h), extra rinse. Start/Pause: Press to begin or pause cycle. Display: Shows time remaining, selected options, and error codes.
Water: Inlet hoses (blue for cold, red for hot). Drain: Hose to standpipe or sink. Power: Grounded outlet.
Tip: Use hose clips provided to secure connections and check for leaks after first run.
Supports various fabrics and soil levels.
WARNING! Do not overload drum. Remove coins, keys, etc., from pockets to prevent damage.
Delay Start: Set 1-24h delay via OPTIONS button. Child Lock: Press and hold OPTIONS buttons for 3 seconds to lock controls. Anti-Allergy Program: Uses higher temperature and extra rinses to reduce allergens. Quick Wash: 14-minute cycle for lightly soiled items.
Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer and door seal regularly.
Monthly Maintenance: Run Cotton program at 90°C without laundry to clean drum. Clean filter: Open flap at front bottom, place container, unscrew filter to drain residual water.
CAUTION! Do not use abrasive cleaners or solvents.
Complies with EU directives for safety, EMC, and energy labeling. CE marked. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service as per local country.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine does not start | Power/child lock/door | Check plug; ensure door closed properly; disable child lock. |
| No water intake | Taps/hoses/filter | Ensure taps are on; check hoses for kinks; clean inlet filter. |
| Excessive vibration/noise | Transit bolts/leveling/load | Remove transit bolts; adjust feet to level; redistribute load evenly. |
| Water does not drain | Drain hose/filter | Check hose for kinks or blockages; clean pump filter. |
| Error codes on display | Various faults | Refer to manual error code list; common: E01 (water supply), E02 (drainage). |
Reset: Unplug for 1 minute, then restart.
Service: Contact authorized Hotpoint service center. Do not attempt repairs yourself.