The Hotpoint Aqualtis AQLF9D 69 U is a 9 kg front-loading washing machine with A+++ energy rating, 1400 rpm spin speed, and advanced features including AquaSave technology, Anti-Stain program, Direct Spray system, and Steam Refresh cycle. It offers multiple wash programs, delay timer, child lock, and self-cleaning detergent drawer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.
Key components: Front-loading drum, electronic control panel, detergent drawer, water inlet valves, drain pump, and adjustable feet.
| Feature | Description |
|---|---|
| AquaSave Technology | Reduces water consumption by up to 50% |
| Anti-Stain Program | Removes tough stains automatically |
| Direct Spray System | Sprays detergent directly onto clothes for better cleaning |
| Steam Refresh | Reduces wrinkles and odors without washing |
| Delay Timer | Delays start up to 24 hours |
| Child Lock | Prevents accidental program changes |
| Self-Cleaning Detergent Drawer | Automatically cleans detergent residue |
| Quick Wash | 15-minute cycle for lightly soiled items |
| Allergy Care | Eliminates 99.9% of allergens |
| Energy Rating | A+++ for maximum efficiency |
Unpack and inspect contents. Place on level, solid floor.
WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.
Power on machine; run initial setup cycle.
CAUTION! Ensure transit bolts are removed before first use to prevent damage.
Control Panel: Program knob, display, temperature button, spin speed button, option buttons.
Buttons: Start/Pause, Delay, Steam, Extra Rinse, Prewash, Child Lock.
Program Selection: Turn knob to desired program (Cotton, Eco 40-60, Quick 15, etc.). Temperature: Press TEMP to select (cold to 90°C). Spin Speed: Press SPIN to adjust (0 to 1400 rpm). Options: Select Extra Rinse, Prewash, Steam as needed. Delay Timer: Set up to 24 hours delay. Child Lock: Press and hold for 3 seconds to activate/deactivate.
Hot and cold water inlet connections; drain hose.
Tip: Check for leaks by running a short cycle after installation.
Supports various fabrics and soil levels.
WARNING! Do not wash items contaminated with flammable substances. Close door properly before starting.
Steam Refresh: Reduces wrinkles and odors in 20 minutes. Anti-Stain: Targets specific stains (wine, grass, oil). AquaSave: Reduces water usage for lighter loads. Delay Start: Programs wash to finish at desired time.
Unplug before maintenance. Clean detergent drawer monthly; run Drum Clean program every 30 cycles.
CAUTION! Do not use abrasive cleaners on door seal. Wipe control panel with damp cloth only.
CE compliant; meets EU energy efficiency and safety standards. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact 0333 305 2265 (UK).
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Power/door | Check plug; ensure door is closed properly; press Start/Pause. |
| No water intake | Taps/hoses | Ensure taps are on; check hose for kinks; clean inlet filter. |
| Excessive vibration | Transit bolts/leveling | Verify transit bolts removed; adjust feet for level. |
| Water leaks | Connections/drain | Tighten hose connections; check drain hose position. |
| Poor washing results | Detergent/loading | Use correct detergent amount; do not overload; select proper program. |
Reset: Unplug for 5 minutes, then restart.
Service: 0333 305 2265; www.hotpoint.eu