Hotpoint washing machine Aqualtis AQGL 109 manual

The Hotpoint Aqualtis AQGL 109 is a 9 kg load capacity front-loading washing machine featuring Aqua-Save technology, multiple wash programs (including Cotton, Synthetics, Delicates, Wool, Quick Wash, and Eco cycles), adjustable spin speeds up to 1400 rpm, delay timer, child lock, and energy efficiency class A+++. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove transit bolts. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Level the machine: Adjust front feet using wrench; use spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if dual inlet).
4. Connect drain hose: Place in standpipe or hook over sink edge (max height 100 cm).
5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Connect power and water; turn on tap fully.
2. Open detergent dispenser; fill compartment II with 100 ml of white vinegar or washing machine cleaner.
3. Select "Drum Clean" program or "Cotton 90°C" without laundry.
4. Press Start; let cycle complete.
5. Set language if applicable via program knob + button combination (default English).

CAUTION! Ensure machine is level to prevent excessive vibration during spin.

Specifications

• Model: Aqualtis AQGL 109
• Capacity: 9 kg (cotton)
• Energy Class: A+++
• Water Consumption: Approx. 50 litres per cycle (Eco 40-60)
• Spin Speed: 1400 rpm (variable)
• Programs: 15 including Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco 40-60, Drum Clean
• Noise Level: Washing: 53 dB; Spinning: 75 dB
• Power Supply: 230-240V, 50Hz, 10A
• Dimensions: Height 85 cm, Width 60 cm, Depth 60 cm
• Weight: 70 kg

Controls and Settings

Control Panel: Program knob, Start/Pause button, Option buttons (Delay, Extra Rinse, Speed, Prewash), LED display, Child Lock button.

Program Selection: Turn knob to desired program (symbols shown on panel).

Options: Press relevant button to activate: Delay (1-24h), Extra Rinse, Spin Speed reduction, Prewash for heavily soiled items.

Detergent Dispenser: Compartment I: Prewash; II: Main wash detergent/liquid; III: Fabric softener.

Child Lock: Press and hold Child Lock button for 3 seconds; press again to deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if model has dual inlet). Use supplied hoses only.

1. Ensure rubber seals are in place on hose ends.
2. Hand-tighten connections; avoid over-tightening.
3. Drain hose: Insert into standpipe (min diameter 4 cm) or secure over sink edge.
4. Check for leaks after first connection.

Tip: Use drain hose extension if needed; do not exceed 150 cm length.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry by color and fabric type.
2. Load machine: Do not exceed 9 kg; distribute evenly.
3. Add detergent: Use compartment II for main wash; follow dosage instructions.
4. Select program: Turn knob (e.g., Cotton 40°C for mixed colors).
5. Adjust options: Set spin speed, extra rinse if needed.
6. Press Start/Pause; machine will begin cycle.
7. At end, remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash waterproof items (e.g., raincoats) or items with solvents.

Special Functions

Delay Timer: Set 1-24 hours; machine will start automatically. Extra Rinse: Adds rinse cycle for sensitive skin. Prewash: For heavily soiled loads; uses compartment I detergent. Speed Adjustment: Reduce spin speed for delicate fabrics. Child Lock: Locks controls during operation.

Care & Cleaning

Monthly maintenance recommended.

1. Clean detergent dispenser: Remove tray; rinse under warm water.
2. Clean door seal: Wipe with damp cloth to remove lint/debris.
3. Run Drum Clean program every 30 cycles (or use 90°C cotton program without laundry).
4. Clean filter: Locate at front bottom right; turn drain cap slowly with bowl underneath; remove debris.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners on door or drum.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at local number provided in warranty card.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service center; do not attempt repairs yourself.