Hotpoint washing machine Aqualtis AQ9F 49 U manual

The Hotpoint Aqualtis AQ9F 49 U is a freestanding washing machine with a 9 kg load capacity, featuring A+++ energy efficiency, 1400 rpm spin speed, and multiple wash programs. It includes Hotpoint's Anti-Stain technology, Direct Spray pre-wash, and a range of smart features for efficient and effective laundry care. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure at least 1 cm space from walls and cabinets.
2. Adjust feet: Use a spanner to level the machine; check with a spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if using dual supply).
4. Connect drain hose: Place in standpipe (min 60 cm height) or secure to sink edge.
5. Plug into a grounded power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run a maintenance wash to clean the drum.

1. Remove any remaining packaging inside the drum.
2. Connect power and turn on the machine.
3. Run the "Drum Clean" program (or a 90° Cotton cycle without laundry) with a little detergent.
4. Set your preferred default settings (e.g., spin speed, temperature) via the control panel.
5. Familiarize yourself with the program selector and display symbols.

CAUTION! Ensure the water supply is turned on before starting any wash cycle.

Specifications

• Model: Aqualtis AQ9F 49 U
• Capacity: 9 kg
• Energy Rating: A+++
• Annual Energy Consumption: 152 kWh
• Water Consumption: Approx. 52 litres per cycle (Cotton 60°)
• Spin Speed: 1400 rpm (adjustable)
• Noise Level (Wash/Spin): 53/76 dB(A)
• Dimensions (HxWxD): 85 x 60 x 59 cm
• Weight: 70 kg
• Power Supply: 230-240 V, 50 Hz
• Programs: 15, including Eco 40-60, Wool, Sportwear, Anti-Allergy

Controls and Settings

Control Panel: Rotary program selector, START/PAUSE button, option buttons (e.g., Temp, Spin, Delay), and digital display.

Program Selection: Turn the dial to choose a wash program (e.g., Cotton, Synthetics, Delicates).

Option Buttons: Adjust temperature, spin speed, delay start, and extra functions (Pre-wash, Extra Rinse). Press repeatedly to cycle through options.

Display: Shows time remaining, selected options, and status icons (e.g., child lock, door locked).

Starting a Cycle: Load laundry, add detergent, select program and options, close door, press START/PAUSE.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps using supplied connectors. Ensure rubber seals are in place.

1. Turn off taps before connecting hoses.
2. Screw hoses onto taps hand-tight, then use pliers for a quarter turn more.
3. Connect other ends to machine inlet valves (marked 🔵 for cold, 🔴 for hot).
4. Drain hose: Insert into standpipe (min 60 cm, max 100 cm height) or hook over sink edge.
5. After connections, turn on taps and check for leaks.

Tip: Use only new hoses; do not reuse old ones. Do not kink or crush hoses.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry by color and fabric type.
2. Load machine: Do not exceed 9 kg; distribute evenly.
3. Add detergent: Use drawer compartments I (pre-wash), II (main wash), ❉ (softener).
4. Select program: Turn dial (e.g., Cotton for cottons, Synthetics for blends).
5. Adjust options: Press Temp, Spin, etc., to customize.
6. Close door and press START/PAUSE.
7. At end of cycle, remove laundry promptly to avoid wrinkles.

Key Programs: Eco 40-60 (energy-saving), Quick 30' (fast wash), Wool (handwash wool), Drum Clean (maintenance).

Special Functions

Anti-Stain: Automatically selects time, temp, and drum action for 6 stains (grass, wine, etc.). Press button before starting cycle.

Direct Spray: Pre-wets laundry for better detergent penetration; automatically activated in some programs.

Delay Start: Set delay up to 24 hours; press Delay button and use +/- to set time.

Child Lock: Press and hold Temp and Spin buttons for 3 seconds to lock/unlock controls.

Extra Rinse: Adds an additional rinse cycle for sensitive skin or heavy detergent use.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Clean detergent drawer: Pull out, rinse under warm water, dry, and reinsert.
2. Clean door seal: Wipe with damp cloth to remove lint and residue; check for objects.
3. Clean drum: Run "Drum Clean" program monthly (or 90° Cotton cycle without laundry).
4. Clean filter: Locate at front bottom; place towel, open cap slowly, drain water, remove debris.
5. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug machine before cleaning filter. Do not use steam or high-pressure cleaners.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2012/19/EU (WEEE). The symbol 🗑️ indicates separate collection for electrical waste. For disposal, contact local authorities. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact customer service as per local country.

Troubleshooting

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service center. Do not attempt repairs yourself.