Hotpoint washing machine Aqualtis AQ8D 49 U manual

The Hotpoint Aqualtis AQ8D 49 U is a freestanding washing machine with 9 kg capacity, A+++ energy rating, 1400 rpm spin speed, and multiple wash programs. It features AquaSave technology for water efficiency, Anti-Stain system for tough stains, Direct Spray for even detergent distribution, and Delay Start function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, adjustable feet.

Feature	Description
Capacity	9 kg laundry load
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
AquaSave Technology	Reduces water consumption
Anti-Stain System	Targets specific stains (wine, grass, oil)
Direct Spray	Sprays detergent directly onto laundry
Delay Start	Program start delay up to 24 hours
Quick Wash	30-minute cycle for lightly soiled items
Child Lock	Prevents program changes during operation
Noise Level	53 dB (washing), 75 dB (spinning)

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Level the machine: Adjust front feet to ensure stability; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure water pressure is 0.5-8 bar.

First-Time Setup

Run empty wash cycle before first use.

Connect power and water supply.
Open detergent drawer; add 100 ml detergent to compartment II.
Select "Cotton" program at 90°C.
Press Start/Pause to begin cycle; let it complete.
After cycle, machine is ready for normal use.

CAUTION! Ensure transit bolts are removed; failure may cause damage.

Specifications

Model: Aqualtis AQ8D 49 U
Capacity: 9 kg
Energy Class: A+++
Annual Consumption: 175 kWh, 10,500 liters water
Spin Speed: 1400 rpm (adjustable)
Programs: 16 programs including Cotton, Synthetics, Delicates, Wool, Sportswear, Anti-Stain, Quick Wash
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230-240V, 50Hz, 10A
Water Pressure: 0.5-8 bar
Weight: 70 kg

Controls and Settings

Control Panel: Program selector knob, digital display, temperature button, spin speed button, option buttons (Delay Start, Extra Rinse, Prewash), Start/Pause button.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Temperature: Press TEMP to select 20-90°C or cold. Spin Speed: Press SPIN to select 400-1400 rpm or Rinse Hold. Options: Delay Start (1-24 hours), Extra Rinse, Prewash. Display: Shows time remaining, cycle phase, error codes.

Connecting Water Supply

Use provided hoses; ensure taps are easily accessible.

Connect blue hose to cold water tap; red to hot (if available).
Screw hoses onto machine inlet valves (marked 1 for cold, 2 for hot).
Open taps fully; check for leaks.
Drain hose: Place in standpipe (min 60 cm height) or over sink edge.

Tip: Use only new hoses; replace every 5 years. Do not kink hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use compartment I for prewash, II for main wash, III for softener.
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for synthetics).
Adjust settings: Temperature, spin speed, options as needed.
Press Start/Pause to begin.
At end, remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash items soaked in solvents; risk of fire.

Special Functions

Anti-Stain: Select program for specific stains (wine, grass, oil). Direct Spray: Ensures detergent is sprayed directly onto load for better cleaning. Delay Start: Set start time (1-24 hours) for off-peak energy use. Child Lock: Press and hold Delay Start + Extra Rinse for 3 seconds to activate/deactivate.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, drum, filter.

Detergent drawer: Remove and rinse under warm water.
Door seal: Wipe with damp cloth; remove debris.
Drum: Run "Drum Clean" program or Cotton 90°C without laundry.
Filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter; clean; reinsert.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives. Waste electrical products must not be disposed with household waste; recycle appropriately. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Error code on display	Various faults	Consult manual for code meaning (e.g., F01: water inlet fault).

Reset: Unplug for 1 minute; plug back in.

Service: 0344 822 4224; www.hotpoint.eu