Hotpoint washing machine Aqualtis AQ113DA 697E manual

The Hotpoint Aqualtis AQ113DA 697E is a freestanding washing machine with a 13 kg load capacity, featuring an A+++ energy rating, 1400 rpm spin speed, and multiple wash programs including Eco, Cotton, Synthetic, Delicate, Wool, and Quick Wash. It includes direct injection technology, anti-allergy cycle, steam function, delay timer, child lock, and automatic load detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, adjustable feet, and power cord.

FeatureDescription
Load Capacity13 kg maximum load for large laundry loads
Energy RatingA+++ for high energy efficiency
Spin SpeedUp to 1400 rpm for effective water extraction
Direct InjectionTechnology for precise water and detergent mixing
Anti-Allergy CycleEliminates allergens with high-temperature wash
Steam FunctionReduces wrinkles and refreshes fabrics
Delay TimerProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Automatic Load DetectionAdjusts water and energy based on load size
Wash ProgramsMultiple programs for different fabric types

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level to check.
  3. Connect water supply: Attach inlet hoses to cold water tap (blue标记) and machine; ensure tight.
  4. Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures or direct sunlight. Ensure water connections are leak-free.

First-Time Setup

Power on machine; run initial setup cycle.

  1. Remove any packaging inside drum.
  2. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  3. Set preferences: Use control dial and buttons to set language, time, etc.
  4. Load detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Controls and Settings

Control Panel: Program dial, display, temperature button, spin speed button, option buttons (Delay, Steam, Extra Rinse, etc.), Start/Pause.

Display Icons: Wash cycle progress, temperature, spin speed, time remaining, child lock, delay start.

Program Selection: Turn dial to desired program (e.g., Cotton, Eco). Temperature: Press TEMP button to select (Cold to 90°C). Spin Speed: Press SPIN button to select (0 to 1400 rpm). Options: Select additional functions like Steam, Extra Rinse. Delay Timer: Set delay up to 24 hours. Child Lock: Press and hold specific buttons to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue-marked hose to cold water supply. Drain: Place hose securely into standpipe (max height 100 cm).

  1. Ensure water tap is fully open.
  2. Check hose for kinks or bends.
  3. After connection, run short cycle to check for leaks.

Tip: Use hose clips for secure connections; do not extend drain hose beyond 150 cm.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Do not exceed 13 kg; distribute evenly.
  2. Add detergent: Use compartments as per detergent type.
  3. Select program: Turn dial (e.g., Cotton for cotton fabrics).
  4. Adjust settings: Set temperature, spin speed, options.
  5. Start: Press Start/Pause; machine will begin cycle.
  6. Pause/Modify: Press Start/Pause to pause; change settings if needed.
  7. End of cycle: Signal sounds; remove laundry promptly.

WARNING! Do not open door during high-temperature cycles; wait for lock light to go off.

Special Functions

Steam Function: Reduces wrinkles, refreshes without washing; select Steam program. Anti-Allergy: High-temperature wash to eliminate allergens. Delay Timer: Set start time for up to 24 hours. Child Lock: Prevents changes during cycle.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with EU directives for safety and energy efficiency. CE marked. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service as per local region.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/doorCheck plug; ensure door closed properly; press Start/Pause.
No water intakeTap/hoseEnsure tap open; check hose for kinks; clean inlet filter.
Water does not drainDrain hose/pumpCheck hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/loadEnsure transit bolts removed; redistribute load evenly.
Error codes on displayVarious faultsRefer to manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes; plug back in.

Service: Contact authorized Hotpoint service center; www.hotpoint.eu

Hotpoint washing machine Aqualtis AQ113DA 697E manual © - All Rights Reserved 2025