Hotpoint washing machine Aqualtis AQ103F 49 manual

The Hotpoint Aqualtis AQ103F 49 is a freestanding washing machine with a 10kg capacity, A+++ energy rating, and 1400 RPM spin speed. It features Aqualtis technology for efficient cleaning, multiple wash programs including cotton, synthetics, delicates, and quick wash, a delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Aqualtis Technology	Optimizes water and energy use for efficient cleaning
10kg Capacity	Large drum for family-sized loads
1400 RPM Spin Speed	High spin for reduced drying time
A+++ Energy Rating	Top energy efficiency class
Multiple Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Delay start up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Leak detection system
Digital Display	Shows time remaining, cycle stage, and settings
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level surface near water and drain points.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if dual supply); ensure washers are fitted.
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Level the machine: Adjust feet using spanner; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set preferences: Use CONTROL knob and OPTIONS buttons to set default spin speed, temperature, etc.
Test child lock: Press and hold CHILD LOCK button for 3 seconds to activate/deactivate.

CAUTION! Ensure water connections are tight to prevent leaks. Check drain hose is not kinked.

Specifications

Capacity: 10kg (cotton).
Energy Rating: A+++ (EU scale).
Spin Speed: Up to 1400 RPM.
Water Pressure: 0.5 - 10 bar.
Programs: 15 including Cotton, Synthetics, Delicates, Wool, Quick Wash (14 min), Sport, Jeans, Drum Clean.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Noise Level: Wash: 53 dB; Spin: 75 dB.
Weight: 70 kg.

Controls and Settings

Control Panel: POWER button, CONTROL knob (select program), OPTIONS buttons (Temp, Spin, Delay, etc.), START/PAUSE button, digital display.

Program Selection: Turn CONTROL knob to choose: Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash, Wool, Sport, Jeans, Drum Clean, etc.

Options: Adjust temperature (cold to 90°C), spin speed (0-1400 RPM), delay start (1-24h), extra rinse, pre-wash. Display: Shows time remaining, selected options, cycle phase. Child Lock: Press and hold for 3 seconds to lock/unlock controls.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (and hot) taps. Drain: Place hose in standpipe (min 60 cm height) or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not overtighten.
Secure drain hose to prevent slipping.
After connection, open taps fully and check for leaks.

Tip: Install a drip tray if machine is on wooden floor. Ensure drain hose is not submerged.

Using Wash Programs

Follow load symbols and program guides.

Sort laundry: By color and fabric type.
Load machine: Do not overload; leave space at top.
Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn CONTROL knob; adjust options as needed.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn knob to change program (if allowed).
End of cycle: Signal sounds; door unlocks after a short delay.
Unload promptly to avoid wrinkles.

WARNING! Do not open door during high-temperature washes; hot water may escape. Check pockets for objects.

Safety Features

Child Lock: Locks controls to prevent changes. Anti-Flood: Stops water if leak detected. Door Lock: Automatically locks during wash; unlocks at end. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run drum clean program every 30 washes. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Do not use harsh chemicals; clean filter regularly to prevent blockages.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center. Serial number located on door rim or rear panel.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure door closed; deactivate child lock.
No water intake	Taps/hoses/filter	Open taps; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose for kinks/blockage; clean pump filter.
Excessive vibration	Transit bolts/leveling/load	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual; unplug for 5 minutes; if persists, call service.

Reset: Unplug for 5 minutes to reset electronics.

Service: Contact authorized Hotpoint service; have model and serial numbers ready.