Hotpoint washing machine AQSD723 EU/A N manual

The Hotpoint AQSD723 EU/A N is a freestanding washing machine with a 7kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 rpm, delay timer, child lock, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with program selector, LED display, detergent dispenser, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	7 kg maximum load
Spin Speed	Up to 1200 rpm
Energy Class	A (Energy efficient)
Programs	Cotton, Synthetics, Delicates, Quick Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	LED indicators for time, cycle stage
Door	Reversible, with safety lock
Adjustable Feet	For leveling on uneven floors
Detergent Dispenser	Compartments for pre-wash, main wash, softener

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in sink or drain pipe; secure to avoid slipping.
Level the machine: Adjust feet using wrench; ensure machine is stable.
Plug into AC power.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without laundry.

Remove packaging and transit bolts completely.
Connect water and drain as per installation.
Plug in and turn on machine.
Select "Cotton" program at 90°C without laundry and start to clean drum.
Set language if applicable via control buttons.

CAUTION! Ensure transit bolts are removed to prevent damage during spin.

Specifications

Model: AQSD723 EU/A N
Capacity: 7 kg
Spin Speed: 1200 rpm (adjustable)
Energy Rating: A
Water Pressure: 0.5 - 8 bar
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash (30°C), Eco 40-60, Spin Only, Rinse & Spin
Dimensions (HxWxD): 85 x 60 x 55 cm (approx)
Power Supply: 220-240V AC, 50Hz
Noise Level: Wash: 56 dB, Spin: 76 dB

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Delay Timer button, Option buttons (e.g., Extra Rinse, Pre-wash), LED display.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Options: Press relevant button to select extra functions (e.g., half load, reduced spin). Delay Timer: Set delay start up to 24 hours. Child Lock: Press and hold specific buttons to activate/deactivate.

Display shows remaining time, cycle stage, and selected options.

Connecting Water & Drain

Water Inlet: Connect hoses to cold water tap (and hot if machine supports). Drain: Place hose in sink or standpipe.

Ensure taps are off before connecting hoses.
Use supplied hoses; do not reuse old ones.
Secure drain hose at height between 60-100 cm to prevent siphoning.
Check for leaks after connections.

Tip: Use hose clips if provided for secure connection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7 kg; distribute evenly.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for synthetics).
Set options: Press buttons for extra rinse, pre-wash, etc.
Start: Press Start/Pause; machine will begin cycle.
Pause/Stop: Press Start/Pause to pause; turn knob to reset to stop.
After cycle: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during high-temperature wash or spin for safety.

Special Functions

Delay Timer: Set delay start for up to 24 hours. Child Lock: Prevents accidental program changes (activate by holding buttons). Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled loads. Half Load: Reduces water for smaller loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser and drum regularly.

Monthly: Run hot wash cycle without laundry to clean drum. Dispenser: Remove and rinse under tap. Filter: Clean pump filter periodically to remove debris.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug and power; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level; redistribute load.
Door will not open	Water temperature/safety	Wait for cool down or end of cycle; machine may have safety lock.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu