Hotpoint washing machine AQS73D 29 EU/A manual

The Hotpoint AQS73D 29 EU/A is a 7kg capacity freestanding washing machine with A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Direct Spray technology for efficient washing, a delay timer, quick wash cycles, and child lock. Designed for EU markets, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent drawer, door with safety lock, water inlet valves, drain pump filter.

FeatureDescription
Direct Spray technologySprays water directly onto laundry for better detergent dissolution
Quick Wash 30'30-minute cycle for lightly soiled loads
Delay TimerDelay start up to 24 hours
Child LockLocks control panel to prevent accidental changes
Anti-flood systemProtects against water leaks
Drum CleanSpecial cycle to clean the drum
Energy ratingA+++ for high energy efficiency
Spin speedUp to 1400 RPM for reduced drying time
Load capacity7 kg (cotton)
Noise levelWash: 53 dB, Spin: 73 dB

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
  3. Connect drain hose: Place in standpipe or sink; ensure no kinks.
  4. Level the machine: Adjust feet; use spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a drum clean cycle.

  1. Connect power and water; open taps.
  2. Add detergent to drawer II (pre-wash) and run a 90°C cotton cycle without laundry.
  3. Set language: Press and hold START/PAUSE + OPTION for 3 seconds to select language.
  4. Test a wash: Load 2-3 kg laundry, select cotton 40°C, add detergent, and start.

CAUTION! Ensure machine is level to prevent vibration. Check hose connections for leaks.

Specifications

Controls and Settings

Control Panel: Rotary selector for programs, LED display, temperature button, spin speed button, option buttons, START/PAUSE.

Programs: Cotton (40°C, 60°C, 90°C), Synthetic, Delicates, Wool, Quick 30', Sport, Jeans, Drum Clean. Options: Extra Rinse, Pre-wash, Delay Start, Speed Wash. Settings: Temperature selection (cold to 90°C), Spin speed (0-1400 RPM), child lock (press TEMP + SPIN for 3 sec).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100 cm).

  1. Turn off taps before connecting hoses.
  2. Use only supplied hoses; do not overtighten.
  3. Ensure drain hose is not submerged to prevent siphoning.
  4. Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7 kg; distribute evenly.
  2. Add detergent: Use drawer I (main wash), II (pre-wash), * (fabric softener).
  3. Select program: Turn rotary selector (e.g., Cotton 40°C).
  4. Set options: Press TEMP/SPIN for adjustments; press OPTION for extra functions.
  5. Start: Press START/PAUSE; door locks automatically.
  6. After wash: Wait for door unlock signal; remove laundry; leave door ajar to dry.

WARNING! Do not open door during wash; wait for unlock. Do not wash waterproof items.

Safety Features

Child Lock: Locks control panel (press TEMP + SPIN for 3 sec). Door Safety Lock: Door locks during wash; unlocks at end. Anti-flood: Stops water if leak detected. Imbalance Control: Reduces spin speed if load uneven.

Care & Cleaning

Clean detergent drawer monthly: Pull out, rinse under tap. Clean drum: Run Drum Clean cycle every 30 washes. Clean filter: Turn off power, open filter cover at front right, drain residual water, remove and clean filter.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label according to EU regulation 1061/2010. For EU disposal, follow WEEE directive. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/doorCheck plug, fuse; ensure door closed properly.
No water intakeTaps/hosesOpen taps; check hoses for kinks; clean inlet filter.
Water does not drainDrain hose/filterCheck hose for kinks; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet for level.
Error codes (e.g., F01)Various faultsConsult manual; unplug for 5 min, restart; call service if persists.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Hotpoint service; www.hotpoint.eu

Hotpoint washing machine AQS73D 29 EU/A manual © - All Rights Reserved 2025