Hotpoint washing machine AQM9D 49 U manual

The Hotpoint AQM9D 49 U is a freestanding washing machine with a 9 kg load capacity, energy efficiency class A, 1400 RPM spin speed, and multiple wash programs including Cotton, Synthetic, Delicate, Wool, and Quick Wash. It features a digital display, delay timer, child lock, anti-crease function, and imbalance control. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water and Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Drum, detergent dispenser, digital control panel, water inlet valves, drain pump, adjustable feet, power cord.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 RPM
Energy Class	A (energy efficient)
Programs	15 programs including Cotton, Eco, Quick 30'
Display	Digital with time remaining indicator
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles after wash
Imbalance Control	Automatically redistributes load
Door Lock	Automatic during operation

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; use spirit level.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first use, run a maintenance wash.

Check installation: Ensure hoses are secure, machine is level.
Open water taps: Turn on fully.
Power on: Press POWER button; display lights up.
Run initial wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use SETTINGS button to adjust beep volume, etc.

CAUTION! Do not use detergent for the first maintenance wash.

Specifications

Model: Hotpoint AQM9D 49 U
Capacity: 9 kg
Dimensions (HxWxD): 85 x 60 x 60 cm
Spin Speed: 1400 RPM (adjustable)
Energy Rating: A
Water Pressure: 0.5 - 10 bar
Programs: 15 including Cotton, Synthetic, Delicate, Wool, Quick Wash
Power Supply: 230-240V, 50Hz
Noise Level: Wash: 53 dB, Spin: 73 dB

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTIONS buttons (Delay, Spin Speed, Temp), CHILD LOCK.

Display Icons: Time remaining, child lock, delay, spin speed, temperature, door lock.

Program Selection: Turn knob to desired program (Cotton, Synthetic, etc.). Options: Adjust temperature (cold-90°C), spin speed (0-1400 RPM), delay (1-24h). Settings Menu: Press and hold SETTINGS to adjust buzzer volume, etc. Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable.

Connecting Water and Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual). Drain: Place hose in standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Secure drain hose to prevent slipping.
Check for leaks after first use.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use dispenser drawers (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for linens).
Adjust options: Press TEMP, SPIN, DELAY as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock.
End of cycle: Buzzer sounds; door unlocks after a few minutes.

WARNING! Do not open door during spin cycle. Remove items promptly to avoid creasing.

Special Functions

Delay Timer: Set 1-24 hours to start later. Child Lock: Locks controls during wash. Anti-Crease: Tumbles periodically after wash if not unloaded. Imbalance Control: Auto-adjusts spin if load is uneven. Quick Wash: 30-minute program for lightly soiled items.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, and filters.

Detergent drawer: Pull out, rinse under tap.
Drum: Run maintenance wash (90°C Cotton without laundry).
Drain filter: Turn off machine, open filter cover at front, place towel, unscrew filter, clean debris.
Door seal: Wipe with damp cloth to remove residue.

CAUTION! Unplug before cleaning filters. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Meets EU energy efficiency and safety standards. Disposal: Follow local regulations for WEEE. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug, power; ensure door closed properly.
No water intake	Taps/hoses/filter	Open taps; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose for blockages; clean drain filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Error codes (e.g., F01)	Various faults	Consult manual; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu