Hotpoint washing machine AQM8F49U V manual

The Hotpoint AQM8F49U V is a 9kg capacity front-loading washing machine with energy rating A+++, 1400 RPM spin speed, multiple wash programs including Cotton, Synthetics, Delicates, Wool, Quick Wash, and Steam Care. Features include Anti-Allergy cycle, Time Manager, Delay Start, Child Lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, AquaStop System.

Feature	Description
Capacity	9kg maximum load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Wash Programs	15 programs including Cotton, Synthetics, Delicates
Steam Care	Reduces wrinkles and allergens
Anti-Allergy	Eliminates 99.9% of allergens
Time Manager	Adjust wash duration
Delay Start	Program start up to 24 hours later
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust front feet; use spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts removed before use.

First-Time Setup

Power on machine; run initial setup.

Run empty wash: Select Cotton 90°C program without laundry to clean drum.
Set language: Press and hold Start/Pause + Delay Start for 3 seconds to select language.
Test functions: Run short program to check water inlet/drain.
Set child lock: Press and hold Child Lock button for 3 seconds (default off).

CAUTION! Ensure machine is level to prevent vibration and noise.

Specifications

Model: AQM8F49U V
Capacity: 9kg (cotton)
Dimensions (HxWxD): 85 x 60 x 60 cm
Spin Speed: 1400 RPM (adjustable)
Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
Water Consumption: 52 liters per cycle (Cotton 60°C)
Noise Level: 53 dB (wash), 73 dB (spin)
Programs: 15 including Steam, Wool, Quick 15’
Power Supply: 230-240V, 50Hz
Weight: 72kg

Controls and Settings

Control Panel: Program Dial, Display, Temperature Button, Spin Speed Button, Option Buttons (Delay Start, Time Manager, Steam, etc.), Start/Pause.

Program Selection: Turn dial to desired program (Cotton, Synthetics, Delicates, Wool, etc.).

Adjustments: Use Temperature button to set wash temp (Cold to 90°C). Use Spin Speed button to set spin (0 to 1400 RPM).

Options: Delay Start (1-24h), Time Manager (reduce wash time), Steam Care, Extra Rinse, Pre-Wash.

Child Lock: Press and hold for 3 seconds to enable/disable.

Connecting Water Supply

Use supplied hoses; ensure taps are easily accessible.

Connect cold water: Blue hose to cold tap (required).
Connect hot water: Red hose to hot tap (optional for mixed washes).
Check connections: Tighten by hand; avoid over-tightening.
Open taps fully: Check for leaks before first use.

Tip: Use AquaStop connector for additional leak protection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn dial (e.g., Cotton for towels/bed linen).
Adjust settings: Set temperature, spin speed, and options.
Start: Press Start/Pause; door locks automatically.
End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during wash; wait for unlock signal.

Special Functions

Steam Care: Reduces wrinkles by 30%, removes allergens. Anti-Allergy: Heats water to 60°C+ to eliminate dust mites and bacteria. Time Manager: Reduces wash time by up to 50%. Delay Start: Program start at later time. Child Lock: Locks controls during operation.

Care & Cleaning

Monthly maintenance recommended.

Clean detergent drawer: Remove and rinse under warm water.
Clean door seal: Wipe with damp cloth; remove debris.
Run drum clean: Use Cotton 90°C program empty every 30 cycles.
Clean filter: Turn off machine; open filter cover at front; drain residual water; clean filter.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Energy label A+++. Meets EU Ecodesign and Energy Labelling regulations. Manufactured by Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact 0333 305 2965 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock/door	Check plug; ensure child lock off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose position (max 100cm); clean pump filter.
Excessive vibration	Transit bolts/leveling/load	Remove transit bolts; relevel machine; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual; unplug for 5 minutes; restart.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 305 2965; www.hotpoint.eu