Hotpoint washing machine AQM8F 49 U manual

The Hotpoint AQM8F 49 U is a freestanding washing machine with 8 kg load capacity, energy class A+++, 1400 rpm spin speed, and multiple wash programs. It features Anti-Stain technology, Direct Spray pre-wash, Delay Timer, Child Lock, and a large LED display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	8 kg (dry laundry)
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Anti-Stain Technology	Automatic stain removal for common stains
Direct Spray	Pre-wash spray for better detergent activation
Programs	15 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
LED Display	Shows time remaining, program, and settings
Noise Level	Wash: 53 dB; Spin: 75 dB

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water inlet: Attach hoses to hot/cold taps (if applicable); use new seals.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure machine is level, hoses connected, transit bolts removed.
Power on: Plug in; machine may beep.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set preferences: Use control dial and buttons to set language, time, etc.
Load detergent: Fill dispenser compartments as per manual.

CAUTION! Do not use machine without removing transit bolts—can cause severe damage.

Specifications

Model: Hotpoint AQM8F 49 U
Capacity: 8 kg
Energy Rating: A+++
Water Consumption: Approx. 52 liters per cycle (cotton 60°C)
Spin Speed: 1400 rpm (adjustable)
Programs: 15 including Eco, Cotton, Synthetic, Wool, Delicate, Sport, Quick 15’
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230-240 V, 50 Hz
Max Load: 8 kg dry weight
Noise: Wash 53 dB(A); Spin 75 dB(A)

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (Delay, Extra Rinse, etc.), LED display.

Program Dial: Turn to select program (Cotton, Synthetic, Delicate, etc.). LED Display: Shows time, program, options. Buttons: START/PAUSE, DELAY (1-24h), CHILD LOCK (press 3 sec), OPTIONS (Extra Rinse, Pre-wash, etc.). Settings: Spin speed reduction, temperature selection, delay start.

Detergent Dispenser: Compartment I (pre-wash), II (main wash), * (fabric softener).

Connecting Water & Drain

Water Inlet: Connect to cold water tap (or hot if available). Drain: Hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not lengthen.
Drain hose height: 60-100 cm from floor.
Secure drain hose to prevent slipping.

Tip: Check for leaks after first connection by running a short program.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 8 kg; distribute evenly.
Add detergent: Use compartments I and II as needed.
Select program: Turn dial (e.g., Cotton for cottons).
Set options: Press buttons for Extra Rinse, Pre-wash, etc.
Start: Press START/PAUSE; machine locks door and begins.
Pause/Stop: Press START/PAUSE to pause; turn dial to reset.
End of cycle: Machine beeps; door unlocks after short delay.

WARNING! Do not open door during spin cycle. Wait until drum stops.

Special Functions

Anti-Stain: Select program with Anti-Stain symbol; machine adjusts for stains. Direct Spray: Activates pre-wash spray for heavy soil. Delay Timer: Set 1-24 hours delay. Child Lock: Press and hold for 3 seconds to lock controls. Quick Wash: 15-minute program for lightly soiled items.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent dispenser: Remove monthly; rinse under water.
Clean door seal: Wipe rubber seal to remove lint/debris.
Run drum clean: Use "Drum Clean" program monthly or with cleaner.
Clean filter: Locate at front bottom; turn drain cap to empty water, then unscrew filter to clean.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Meets EU energy efficiency and safety standards. Disposal: Follow local WEEE regulations. For support, visit www.hotpoint.eu or contact customer service at +39 095 403 1111 (Italy).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Door not closed/power	Close door firmly; check plug/power; press Start.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water does not drain	Drain blocked/filter clogged	Check drain hose for blockages; clean pump filter.
Excessive vibration	Transit bolts not removed/uneven load	Remove transit bolts; redistribute laundry; level feet.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 min, retry.
Detergent not dispensed	Dispenser clogged	Clean dispenser compartments; use correct detergent type.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service center.